Built in house at WCFab carrying a LIFETIME WARRANTY against bending or breaking (to original purchaser). Traction bars are a necessary upgrade when increasing the horsepower on your truck to prevent the axle from twisting which can lead to broken u-joints, driveshafts, and even twisted axle housings. Our traction bar brackets bolt on to the bottom of the axle tube via the axle u-bolts and weld to the frame on the front end. We use a high quality RockJock rebuild-able and grease-able "Johnny Joint" heim connection at the frame to allow for adjustment of torsion on the axle or if you raise/lower the rear of your truck. At the axle connection we use a heavy duty Polyurethane Bushing for decreased noise and vibration which is common complaint if a solid heim is used on both ends. Grade 8 hardware connects the bars to the mounts on the frame and axle. We complete our traction bar kit with our professional in house powder coat process in your color choice and comes standard with a Epoxy Primer base coat before the final color which increases corrosion resistance by more than ten times compared to just your standard powder single coat application.
- For Regular Cab Long Bed, Extended Cab Short Bed and Crew Cab Short Bed Models
- Powder Coating with epoxy primer base coat
- Frame side weld on mounts
- Axle side bolt on mounts
- RockJock Johnny Joints
- 60" Heavy Duty Bars
- Grade 8 Hardware
- Poly Bushings
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | Chevrolet | Silverado 1500 | Custom |
| 2014-2018 | Chevrolet | Silverado 1500 | High Country |
| 2015-2018 | Chevrolet | Silverado 1500 | LS |
| 2014-2018 | Chevrolet | Silverado 1500 | LT |
| 2014-2018 | Chevrolet | Silverado 1500 | LTZ |
| 2015-2018 | Chevrolet | Silverado 1500 | SSV |
| 2014-2018 | Chevrolet | Silverado 1500 | WT |