Quick Links:
IMPORTANT
- HERE IS HOW YOU CAN TELL IF YOUR SPRINTER USES THE OLD VS NEW EXHAUST KIT
- MUST UNPLUG THE SCR CONTROLLER. The location of the adblue controller should be under the dash on the passenger side.
here are pictures of the controller placement:
- Picture #1
- Picture #2
- Picture #3
- Picture #4
- The NOx sensors and SCR (adblue) injector should be unplugged as well.
- Unplug DPF pressure and temperature (EGT) sensors too.
-
PLEASE NOTE THAT IF THE VEHICLE CURRENTLY HAS A COUNTDOWN FOR STARTS REMAINING, IS IN IDLE MODE, OR HAS ANY DEF RELATED FAULT, YOU NEED TO USE MERCEDES SPECIFIC TOOLING TO RESET THE SYSTEM AND CORRECT THE CODES BEFORE TUNING. FAILURE TO DO SO WILL RESULT IN TUNE NOT FUNCTIONING AND LOTS OF ADDITIONAL STEPS AND COST TO REMEDY THE SITUATION.
Increase the performance, reliability and fuel economy of your Sprinter 3.0L by eliminating the restrictive Diesel Particulate Filter (DPF) and factory catalytic converters, thus allowing the exhaust to flow more freely. This can be a huge benefit for small and large business owners alike. Save on long term repair expenses while gaining immediate fuel economy, it's a win/win!
This package includes all the hardware you will need for a complete DPF delete. With this setup you should be aware that the straight pipe configuration has a severe drone while highway driving and is significantly louder than the factory setup. if you are looking for stock-like silence, we highly recommend one the Resonator option.
Unlike other products on the market, we took the time and effort required to utilize the stock mounting bracket on the engine block. Incorporating this into our design keeps as much weight as possible off of your turbo, ensuring that this product will not put added stress and wear on the turbo, because let's be honest, that's the last thing you need!
The DPF Delete downpipe is built to last with 304 grade stainless steel and the world's most reliable aftermarket flex pipe. Rest assured that all required sensors will be plugged back in where they belong in the new downpipe. Made from 304 stainless steel, you can be certain it will outlast any warranty out there, that's why ours is a lifetime warranty.
All of the hardware needed for installation is included.
Installation time
Installation time will vary greatly based on experience, know-how and having the right tools and lift, so please take the following prediction with a grain of salt. This is simply a general idea of how long it could take in an ideal situation:
Around 3-4 hours.
What's in the box
- DPF Delete Downpipe - for Sprinter 3.0L
- DPF Delete Exhaust 3" Midpipe for Sprinter
- Reducer Adapter - 3" Midpipe to Stock Exhaust
- 3" Exhaust Strap Clamp (3)
Benefits:
- Better fuel economy - with proper tune
- Longer turbo life (no more DPF)
Features:
- 304 stainless steel
- 3" OD 16 gauge tubing
- 100% bolt-on
Fitment:
Will fit the following North American spec vehicles with DPF (diesel particulate filter):- Mercedes Benz Sprinter 3.0L (2019+)
- Freightliner Sprinter 3.0L (2018-2020)