*item may differ from images
The Drag Bandit features our classic Bandit design and combines a built-in head sock meeting SFI 10 requirements while providing enhanced impact protection. NOTE: This helmet is Snell SA2020-certified and is broadly accepted by race organizing bodies and tracks through 2030. Always verify safety rules with your sanctioning body. The Snell Foundation recommends replacement after five (5) years from the date of manufacture. After this period, the helmet’s protective performance may diminish, and it may no longer meet safety requirements or be accepted for use in sanctioned events or competitions.
Simpson Safety Simpson Racing Drag Bandit Racing Helmet 7220004
Specifications:
| Brand | Simpson Racing |
| Emission Code | 6 |
| Product Type | Auto Racing Helmet |
| part type | Helmet |
| Category | Vehicles, Equipment, Tools, and Supplies |
| Sub Category | Safety Equipment, Tools and Accessories |
| Helmet Family | Drag Bandit SA2020 |
| 26 | Full Face |
| Size | X-Small |
| Graphic Design | Red |
| 3494 | Red |
| Finish | Gloss |
| 3552 | Composite |
| 3554 | Black |
| Certification Rating | Snell SA2020 |
| SFI Certification | SFI.10 |
| Quantity | Sold Individually |
| Warning | "WARNING: MOTOR RACING IS EXTREMELY HAZARDOUS! THIS ARTICLE IS SOLD WITHOUT WARRANTY, EXPRESSED OR IMPLIED, FOR OFF-HIGHWAY USE ONLY. NO REPRESENTATION IS MADE THAT THIS PRODUCT WILL PROTECT THE USER FROM DEATH, INJURY, OR WORSE. THE USER ASSUMES ALL RISKS INVOLVED WITH THE USE OF THIS PRODUCT AND AGREES TO HOLD THE MANUFACTURER AND DISTRIBUTOR HARMLESS. IF A SNELL, SFI, OR FIA CERTIFICATION IS AFFIXED TO THIS ITEM, IT HAS BEEN MANUFACTURERD TO SPECIFICATIONS SET FORTH BY THEIR ORGANIZATION AND HAS BEEN TESTED, APPROVED, AND CERTIFIED BY THEM. ALL GEAR SHOULD BE INSPECTED PRIOR TO EACH USE AND REPLACED IF PRODUCT SHOWS SIGNS OF WEAR OR THE PRESENCE OF ANY FACTORS THAT COULD COMPROMISE INTEGRITY. RACEQUIP IS A TRADEMARK OF HOLLEY PERFORMANCE PRODUCTS, INC." |
| Warning | California Proposition 65 |
| Brand | Simpson Racing |
| Emission Code | 6 |
| Product Type | Auto Racing Helmet |
| part type | Helmet |
| Category | Vehicles, Equipment, Tools, and Supplies |
| Sub Category | Safety Equipment, Tools and Accessories |
| Helmet Family | Drag Bandit SA2020 |
| 26 | Full Face |
| Size | X-Small |
| Graphic Design | Red |
| 3494 | Red |
| Finish | Gloss |
| 3552 | Composite |
| 3554 | Black |
| Certification Rating | Snell SA2020 |
| SFI Certification | SFI.10 |
| Quantity | Sold Individually |
| Warning | "WARNING: MOTOR RACING IS EXTREMELY HAZARDOUS! THIS ARTICLE IS SOLD WITHOUT WARRANTY, EXPRESSED OR IMPLIED, FOR OFF-HIGHWAY USE ONLY. NO REPRESENTATION IS MADE THAT THIS PRODUCT WILL PROTECT THE USER FROM DEATH, INJURY, OR WORSE. THE USER ASSUMES ALL RISKS INVOLVED WITH THE USE OF THIS PRODUCT AND AGREES TO HOLD THE MANUFACTURER AND DISTRIBUTOR HARMLESS. IF A SNELL, SFI, OR FIA CERTIFICATION IS AFFIXED TO THIS ITEM, IT HAS BEEN MANUFACTURERD TO SPECIFICATIONS SET FORTH BY THEIR ORGANIZATION AND HAS BEEN TESTED, APPROVED, AND CERTIFIED BY THEM. ALL GEAR SHOULD BE INSPECTED PRIOR TO EACH USE AND REPLACED IF PRODUCT SHOWS SIGNS OF WEAR OR THE PRESENCE OF ANY FACTORS THAT COULD COMPROMISE INTEGRITY. RACEQUIP IS A TRADEMARK OF HOLLEY PERFORMANCE PRODUCTS, INC." |
| Warning | California Proposition 65 |
| Description_INV | DRAG BANDIT 2020 XSM RED |
| Description_DES | Simpson Racing Drag Bandit Racing Helmet |
| Description_EXT | X-Small - Red |
| Description_MKT | The Drag Bandit features our classic Bandit design and combines a built-in head sock meeting SFI 10 requirements while providing enhanced impact protection. NOTE: This helmet is Snell SA2020-certified and is broadly accepted by race organizing bodies and tracks through 2030. Always verify safety rules with your sanctioning body. The Snell Foundation recommends replacement after five (5) years from the date of manufacture. After this period, the helmet’s protective performance may diminish, and it may no longer meet safety requirements or be accepted for use in sanctioned events or competitions. |
| Description_FAB | Your helmet ships with one clear shield installed |
| Description_FAB | Built-in head sock meets drag requirements (SFI.10 ready)100% shield seal |
| Description_FAB | Snell SA2020 rated |
| Description_FAB | Best for drag racing |
| Description_FAB | Frontal head restraint ready |
| Description_FAB | Pre-drilled for head and amp |
| Description_FAB | neck restraint device |
| Description_FAB | The Snell SA2020 testing requirements have changed a small amount and have now become more in line with the FIA 8859 Helmet Standard |
| Description_FAB | Increased velocity by 5-10% for impact testing on the 2nd hit across all shell sizes |
| Description_FAB | Increased velocity from 5.7 to 6.0 m/s on the 54cm to 59cm size |
| Description_FAB | Increased peak G threshold on the 54cm to 59cm size and 60cm-64cm size |
| Description_INV | DRAG BANDIT 2020 XSM RED |
| Description_DES | Simpson Racing Drag Bandit Racing Helmet |
| Description_EXT | X-Small - Red |
| Description_MKT | The Drag Bandit features our classic Bandit design and combines a built-in head sock meeting SFI 10 requirements while providing enhanced impact protection. NOTE: This helmet is Snell SA2020-certified and is broadly accepted by race organizing bodies and tracks through 2030. Always verify safety rules with your sanctioning body. The Snell Foundation recommends replacement after five (5) years from the date of manufacture. After this period, the helmet’s protective performance may diminish, and it may no longer meet safety requirements or be accepted for use in sanctioned events or competitions. |
| Description_FAB | Your helmet ships with one clear shield installed |
| Description_FAB | Built-in head sock meets drag requirements (SFI.10 ready)100% shield seal |
| Description_FAB | Snell SA2020 rated |
| Description_FAB | Best for drag racing |
| Description_FAB | Frontal head restraint ready |
| Description_FAB | Pre-drilled for head and amp |
| Description_FAB | neck restraint device |
| Description_FAB | The Snell SA2020 testing requirements have changed a small amount and have now become more in line with the FIA 8859 Helmet Standard |
| Description_FAB | Increased velocity by 5-10% for impact testing on the 2nd hit across all shell sizes |
| Description_FAB | Increased velocity from 5.7 to 6.0 m/s on the 54cm to 59cm size |
| Description_FAB | Increased peak G threshold on the 54cm to 59cm size and 60cm-64cm size |