*item may differ from images
Simpson Cruiser 2.0 helmet is for drivers wanting great protection while still enjoying the wind in their face. An open face design allows the driver to wear goggles, glasses or sun glasses. The new Cruiser 2.0 is light and comfortable with classic Nascar styling. This helmet is ideal for autocross and driving school applications. Meeting SA2020 standards the Cruiser 2.0 is frontal head restraint ready, just install your post anchors and you are ready to attach your properly adjusted frontal head restraint device. NOTE: This helmet is Snell SA2020-certified and is broadly accepted by race organizing bodies and tracks through 2030. Always verify safety rules with your sanctioning body. The Snell Foundation recommends replacement after five (5) years from the date of manufacture. After this period, the helmet’s protective performance may diminish, and it may no longer meet safety requirements or be accepted for use in sanctioned events or competitions.
Simpson Safety CRUISER 2.0 SML 55-56 CM WHITE 7320011
Specifications:
| Brand | Simpson Racing |
| Emission Code | 6 |
| Product Type | Auto Racing Helmet |
| part type | Helmet |
| Category | SMP Helmets |
| Sub Category | Safety Equipment, Tools and Accessories |
| Helmet Family | Cruiser 2.0 |
| Helmet Type | Cruiser 2.0 |
| 26 | Full Face |
| 1318 | Small |
| Graphic Design | White |
| 3494 | White |
| Finish | Gloss |
| 3552 | Composite |
| 3554 | Black |
| Certification Rating | Snell SA2020 |
| Quantity | Sold Individually |
| Helmet Weight | 6 lbs. |
| Warning | California Proposition 65 |
| Warning | "WARNING: MOTOR RACING IS EXTREMELY HAZARDOUS! THIS ARTICLE IS SOLD WITHOUT WARRANTY, EXPRESSED OR IMPLIED, FOR OFF-HIGHWAY USE ONLY. NO REPRESENTATION IS MADE THAT THIS PRODUCT WILL PROTECT THE USER FROM DEATH, INJURY, OR WORSE. THE USER ASSUMES ALL RISKS INVOLVED WITH THE USE OF THIS PRODUCT AND AGREES TO HOLD THE MANUFACTURER AND DISTRIBUTOR HARMLESS. IF A SNELL, SFI, OR FIA CERTIFICATION IS AFFIXED TO THIS ITEM, IT HAS BEEN MANUFACTURERD TO SPECIFICATIONS SET FORTH BY THEIR ORGANIZATION AND HAS BEEN TESTED, APPROVED, AND CERTIFIED BY THEM. ALL GEAR SHOULD BE INSPECTED PRIOR TO EACH USE AND REPLACED IF PRODUCT SHOWS SIGNS OF WEAR OR THE PRESENCE OF ANY FACTORS THAT COULD COMPROMISE INTEGRITY. RACEQUIP IS A TRADEMARK OF HOLLEY PERFORMANCE PRODUCTS, INC." |
| Description_INV | CRUISER 2.0 SML 55-56 CM WHITE |
| Description_DES | SIMPSON CRUISER 2.0 HELMET |
| Description_EXT | CRUISER 2.0 SML 55-56 CM WHITE |
| Description_MKT | Simpson Cruiser 2.0 helmet is for drivers wanting great protection while still enjoying the wind in their face. An open face design allows the driver to wear goggles, glasses or sun glasses. The new Cruiser 2.0 is light and comfortable with classic Nascar styling. This helmet is ideal for autocross and driving school applications. Meeting SA2020 standards the Cruiser 2.0 is frontal head restraint ready, just install your post anchors and you are ready to attach your properly adjusted frontal head restraint device. NOTE: This helmet is Snell SA2020-certified and is broadly accepted by race organizing bodies and tracks through 2030. Always verify safety rules with your sanctioning body. The Snell Foundation recommends replacement after five (5) years from the date of manufacture. After this period, the helmet’s protective performance may diminish, and it may no longer meet safety requirements or be accepted for use in sanctioned events or competitions. |
| Description_FAB | Open faced design allows drivers to wear goggles, glasses |
| Description_FAB | Meets Snell SA2020 standards |
| Description_FAB | Features a peak with anti-glare strip |
| Description_FAB | Frontal head restraint ready |
| Description_INV | CRUISER 2.0 SML 55-56 CM WHITE |
| Description_DES | SIMPSON CRUISER 2.0 HELMET |
| Description_EXT | CRUISER 2.0 SML 55-56 CM WHITE |
| Description_MKT | Simpson Cruiser 2.0 helmet is for drivers wanting great protection while still enjoying the wind in their face. An open face design allows the driver to wear goggles, glasses or sun glasses. The new Cruiser 2.0 is light and comfortable with classic Nascar styling. This helmet is ideal for autocross and driving school applications. Meeting SA2020 standards the Cruiser 2.0 is frontal head restraint ready, just install your post anchors and you are ready to attach your properly adjusted frontal head restraint device. NOTE: This helmet is Snell SA2020-certified and is broadly accepted by race organizing bodies and tracks through 2030. Always verify safety rules with your sanctioning body. The Snell Foundation recommends replacement after five (5) years from the date of manufacture. After this period, the helmet’s protective performance may diminish, and it may no longer meet safety requirements or be accepted for use in sanctioned events or competitions. |
| Description_FAB | Open faced design allows drivers to wear goggles, glasses |
| Description_FAB | Meets Snell SA2020 standards |
| Description_FAB | Features a peak with anti-glare strip |
| Description_FAB | Frontal head restraint ready |
| Brand | Simpson Racing |
| Emission Code | 6 |
| Product Type | Auto Racing Helmet |
| part type | Helmet |
| Category | SMP Helmets |
| Sub Category | Safety Equipment, Tools and Accessories |
| Helmet Family | Cruiser 2.0 |
| Helmet Type | Cruiser 2.0 |
| 26 | Full Face |
| 1318 | Small |
| Graphic Design | White |
| 3494 | White |
| Finish | Gloss |
| 3552 | Composite |
| 3554 | Black |
| Certification Rating | Snell SA2020 |
| Quantity | Sold Individually |
| Helmet Weight | 6 lbs. |
| Warning | California Proposition 65 |
| Warning | "WARNING: MOTOR RACING IS EXTREMELY HAZARDOUS! THIS ARTICLE IS SOLD WITHOUT WARRANTY, EXPRESSED OR IMPLIED, FOR OFF-HIGHWAY USE ONLY. NO REPRESENTATION IS MADE THAT THIS PRODUCT WILL PROTECT THE USER FROM DEATH, INJURY, OR WORSE. THE USER ASSUMES ALL RISKS INVOLVED WITH THE USE OF THIS PRODUCT AND AGREES TO HOLD THE MANUFACTURER AND DISTRIBUTOR HARMLESS. IF A SNELL, SFI, OR FIA CERTIFICATION IS AFFIXED TO THIS ITEM, IT HAS BEEN MANUFACTURERD TO SPECIFICATIONS SET FORTH BY THEIR ORGANIZATION AND HAS BEEN TESTED, APPROVED, AND CERTIFIED BY THEM. ALL GEAR SHOULD BE INSPECTED PRIOR TO EACH USE AND REPLACED IF PRODUCT SHOWS SIGNS OF WEAR OR THE PRESENCE OF ANY FACTORS THAT COULD COMPROMISE INTEGRITY. RACEQUIP IS A TRADEMARK OF HOLLEY PERFORMANCE PRODUCTS, INC." |