*item may differ from images
The Edelbrock #3637 Fuel Rail is designed for use with the #50565 Pontiac Torker II EFI Manifold. The manifold and fuel rail kit work with Pico injectors (1.50" O-ring center-to-center spacing) only. This kit contains two machined fuel rails and mounting hardware. The cross-over plumbing and regulator requirements depend on the application, so the customer will need to supply their own. The fuel rail ends are tapped for -6 AN fittings.
Edelbrock Fuel Injector Rail Kit 3637
Specifications:
| Recommended Use | With Torker II Manifold #50565 and Pico Injectors |
| Finish | Clear |
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Material | Aluminum |
| Regulator Included | No |
| Quantity | Kit |
| Outlet Fitting Thread Size | -6 an |
| Inlet Fitting Thread Size | -6 an |
| Mounting Hardware Included | Yes |
| Description_ABR | Fuel Rail |
| Description_INV | Fuel Rail Kit, Pontiac, Torker II |
| Description_LAB | Fuel Injector Rail Kit #3637, -6 AN Clear For Pontiac V8 |
| Description_ASM | Pontiac:-:326 (5.3L)/350 (5.7L)/389 (6.4L)/400 (6.6L)/421 (6.9L)/428 (7.0L)/455 (7.4) |
| Description_EXT | Edelbrock #3637 is designed for use with the #50565 Pontiac Torker II Intake Manifold. The fuel rail kit hardware works with 1.50" O-ring center-to-center spacing injectors only. |
| Description_MKT | The Edelbrock #3637 Fuel Rail is designed for use with the #50565 Pontiac Torker II EFI Manifold. The manifold and fuel rail kit work with Pico injectors (1.50" O-ring center-to-center spacing) only. This kit contains two machined fuel rails and mounting hardware. The cross-over plumbing and regulator requirements depend on the application, so the customer will need to supply their own. The fuel rail ends are tapped for -6 AN fittings. |
| Description_DEF | Fuel Injector Rail Kit |