*item may differ from images
Edelbrock part #2022 E-Street Top End Kit is designed for 1957-86 Small-Block Chevy V-8 engines. This Top End Kit produced 315 HP & 381 TQ on a 350 c.i.d Chevy with 9.0:1 compression. The kit delivers affordable street performance and great drivability from idle to 5,500 rpm. This kit includes a Performer EPS intake manifold, E-Street cylinder heads, Performer hydraulic flat tappet camshaft, pushrods, timing chain, complete bolt kit and an Edelbrock gasket set. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with "no guesswork" involved.
Edelbrock Engine Top End Kit 2022
Specifications:
| Horsepower | Possible 315 |
| Grade Type | Performance |
| Finish | Satin |
| Family | E-Street |
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Gasket Material | MP-IIN Micropore |
| Cylinder Head Port Shape | Rectangular |
| Series | E-Street |
| Minimum Torque | Possible 381 |
| Description_ABR | Top End Kt |
| Description_INV | E-Street Top End Kit 1957-86 S/B Chevy |
| Description_LAB | E-Street 315 HP Top End Kit for 1957-86 Small-Block Chevy V-8 Engines |
| Description_ASM | Chevrolet:Small-Block Gen I:262 (4.3L)/265 (4.3L)/267 (4.4L)/283 (4.6L)/302 (4.9L)/305 (5.0L)/307 (5.0L)/327 (5.4L)/350 (5.7L)/400 (6.6L) |
| Description_EXT | Edelbrock part #2022 E-Street Top End Kit is designed for 1957-86 Small-Block Chevy V-8 engines. This Top End Kit produced 315 HP & 381 TQ on a 350 c.i.d Chevy with 9.0:1 compression. |
| Description_MKT | Edelbrock part #2022 E-Street Top End Kit is designed for 1957-86 Small-Block Chevy V-8 engines. This Top End Kit produced 315 HP & 381 TQ on a 350 c.i.d Chevy with 9.0:1 compression. The kit delivers affordable street performance and great drivability from idle to 5,500 rpm. This kit includes a Performer EPS intake manifold, E-Street cylinder heads, Performer hydraulic flat tappet camshaft, pushrods, timing chain, complete bolt kit and an Edelbrock gasket set. To get great performance out of any engine, all of the components must work together. For over 30 years, the Edelbrock Total Power Package system has solved the parts matching puzzle for many street performance enthusiasts. With the introduction our Power Package Top End Kits, now you can get the best Edelbrock performance in-one-box, under one part number with "no guesswork" involved. |
| Description_TRA | Do not exceed 5,500 RPM's. |
| Description_TRA | E-Street heads are for hydraulic flat tappet camshafts ONLY. |
| Description_TRA | For S/B Chevy 1957-86 |
| Description_TRA | Results on a 350 c.i.d. S/B w/9.0:1 compression. |
| Description_TRA | Proper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage. |
| Description_TRA | Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA | Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage. |
| Description_TRA | NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal. |
| Description_TRA | DO NOT OVERTIGHTEN NPT/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT/Pipe thread is a tapered thread. |
| Description_DEF | Engine Top End Kit |