*item may differ from images
Edelbrock part #2981 Victor Jr. 351W (9.5" deck) intake manifold is designed for competition 351 Windsor Ford V8's from 1969 and later with the following heads: Edelbrock Performer RPM heads #60259, Victor Jr. heads #77169, Victor heads #77219 or similar heads. This intake manifold fits SVO blocks with a 9.5" deck height. Ideal for both oval track and drag racing engines operating between 3500 and 7500 rpm. Runners have a 2.70 square-inch cross sectional area. The Edelbrock Victor Jr. is a single-plane, high-rise intake designed for maximum race-winning power at higher engine speeds.
Edelbrock Engine Intake Manifold 2981
Specifications:
| Finish | Satin |
| EGR Port | No |
| Basic Operating RPM Range | 3500-7500 |
| Center Maximum Height | 5.750 |
| Gasket Or Seal Included | No |
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Vehicle Model | Ford |
| Single Or Dual Plane Type | Single |
| Series | Victor |
| Material | Aluminum |
| Front Maximum Height | 5.750 |
| Grade Type | Performance |
| CNC Ported | No |
| Rear Maximum Height | 5.750 |
| Flange Type | 4150 |
| Description_ABR | Intake Mnfld |
| Description_INV | Victor Jr 9.5 Deck Ford 351W Intake Man |
| Description_LAB | Victor Jr. 351W Intake Manifold Small-Block Ford |
| Description_ASM | Ford:Small-Block Windsor:351 (5.8L) |
| Description_EXT | Edelbrock Victor Jr. 351W (9.5" deck) Intake Manifold for Ford 351-427 Small-Block Windsor V8 |
| Description_MKT | Edelbrock part #2981 Victor Jr. 351W (9.5" deck) intake manifold is designed for competition 351 Windsor Ford V8's from 1969 and later with the following heads: Edelbrock Performer RPM heads #60259, Victor Jr. heads #77169, Victor heads #77219 or similar heads. This intake manifold fits SVO blocks with a 9.5" deck height. Ideal for both oval track and drag racing engines operating between 3500 and 7500 rpm. Runners have a 2.70 square-inch cross sectional area. The Edelbrock Victor Jr. is a single-plane, high-rise intake designed for maximum race-winning power at higher engine speeds. |
| Description_TRA | Recommended intake gasket: Edelbrock #7220 or Fel-Pro #1262 |
| Description_TRA | Manifold height: A-5.75", B-5.75" |
| Description_TRA | Cab recommendations: Any size or type of carburetor class allows |
| Description_TRA | Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA | Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Description_DEF | Engine Intake Manifold |