*item may differ from images
Edelbrock part #7112 Performer RPM Camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 397 HP & 400 ft-lbs. of torque when used with #7111 intake and stock iron cylinder heads on a 350 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 224 degrees - Duration @ .050 Exhaust: 234 degrees - Lift @ Valve Intake: .496" - Lift @ Valve Exhaust: .520" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 12"
Edelbrock Engine Camshaft and Lifter Kit 7112
Specifications:
| Lobe Separation | 112 |
| Advertised Intake Duration | 290 |
| Intake Duration .050 Inch Lift | 224 |
| Grade Type | Performance |
| Lifter Materials | Hardened Steel |
| Cam Type | Cast |
| Lifter Type | Hydraulic |
| Advertised Exhaust Duration | 300 |
| Intake Valve Lift | 0.496 |
| Exhaust Duration at .050 inch Lift | 234 |
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Computer Controlled Compatible | No |
| Exhaust Valve Lift | 0.520 |
| Description_ABR | Cam Lift kit |
| Description_INV | Edelbrock Performer RPM Camshaft Kit |
| Description_LAB | Performer-Plus Camshaft Kit for Small-Block Oldsmobile 350-403 V8 |
| Description_ASM | Oldsmobile:Small-Block:330 (5.4L)/350 (5.7L)/403 (6.6L) |
| Description_EXT | Edelbrock part #7112 Performer RPM Camshaft is designed for small-block Oldsmobile 350-403 V-8. This Edelbrock cam kit produced 397 HP & 400 ft-lbs. of torque when used with #7111 intake and stock iron cylinder heads on a 350 engine. |
| Description_MKT | Edelbrock part #7112 Performer RPM Camshaft is designed for small-block Oldsmobile 350-403 V-8 applications. This Edelbrock cam kit produced 397 HP & 400 ft-lbs. of torque when used with #7111 intake and stock iron cylinder heads on a 350 engine. The camshaft works well with high-performance's street applications, Performer RPM cams provide power from 1500 to 6500 rpm. This hydraulic lifter camshaft is dyno-matched to Performer RPM manifolds for high-rpm horsepower while still maintaining acceptable low-end torque. With 10 to 12 inches of manifold vacuum at idle, Performer RPM cams have more lift and duration than most street camshafts. Hydraulic flat tappet lifters are included with each Performer RPM camshaft. Camshaft Specifications: - Duration @ .050 Intake: 224 degrees - Duration @ .050 Exhaust: 234 degrees - Lift @ Valve Intake: .496" - Lift @ Valve Exhaust: .520" - Lobe Separation: 112 Degrees - Intake Centerline: 107 Degrees - Idle Vacuum @ 1000 RPM's: 12" |
| Description_TRA | Use only stock ratio rocker arms |
| Description_TRA | Adjustable valvetrain required |
| Description_TRA | In order for this Performer RPM cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Seat Valve Springs or equivalent. |
| Description_TRA | Do not use rotator type valve springs or retainers for this application. |
| Description_TRA | Oil/additive must contain Zinc designed for use with flat tappet camshafts. |
| Description_TRA | Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. |
| Description_TRA | Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Description_TRA | Use only stock ratio rocker arms |
| Description_TRA | Adjustable valvetrain required |
| Description_TRA | In order for this Performer RPM cam and lifter kit to be covered under ANY WARRANTY you MUST use the correct Edelbrock Sure Seat Valve Springs or equivalent. |
| Description_TRA | Do not use rotator type valve springs or retainers for this application. |
| Description_TRA | Oil/additive must contain Zinc designed for use with flat tappet camshafts. |
| Description_TRA | Coat cam lobes and bottoms of each lifter with MoS2 lube (supplied) to prevent cam lobe and lifter wear from occurring during initial start-up. |
| Description_TRA | Do not allow the engine to run under 2000 rpm for the first 1/2 hour. Slow idle speeds may result in severe cam and lifter wear. Start the engine and bring to break-in rpm. |
| Description_DEF | Engine Camshaft and Lifter Kit |
This Part Fits:
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 1973 | Buick | Apollo | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Buick | Apollo | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Buick | Apollo | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Buick | Centurion | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Buick | Century | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Buick | Century | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Buick | Century | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Buick | Century | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Century | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Century | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Century | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Electra | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Electra | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Electra | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Buick | Electra | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Buick | Electra | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Buick | Electra | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Buick | Electra | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Buick | Electra | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Estate Wagon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Estate Wagon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Buick | Estate Wagon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Buick | Estate Wagon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Buick | Estate Wagon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Buick | Estate Wagon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Buick | Estate Wagon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Buick | GS | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Buick | LeSabre | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Buick | Regal | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Buick | Regal | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Buick | Regal | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Buick | Regal | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Regal | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Regal | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Riviera | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Riviera | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Riviera | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Buick | Riviera | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Buick | Riviera | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Buick | Riviera | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Buick | Riviera | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Buick | Skylark | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Buick | Sportwagon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Cadillac | Eldorado | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Cadillac | Eldorado | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Cadillac | Seville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Cadillac | Seville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Cadillac | Seville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Cadillac | Seville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Cadillac | Seville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | Bel Air | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Chevrolet | Bel Air | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Chevrolet | Bel Air | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Chevrolet | Bel Air | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | Biscayne | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | Brookwood | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | C10 Pickup | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | C20 Suburban | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | C30 Pickup | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | Camaro | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Chevrolet | Camaro | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Chevrolet | Camaro | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Chevrolet | Camaro | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | Caprice | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Chevrolet | Caprice | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Chevrolet | Caprice | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Chevrolet | Caprice | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | Chevelle | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Chevrolet | Chevelle | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | El Camino | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Chevrolet | El Camino | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Chevrolet | El Camino | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Chevrolet | El Camino | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | G20 Van | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | Impala | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Chevrolet | Impala | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Chevrolet | Impala | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Chevrolet | Impala | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | K10 Pickup | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | K10 Suburban | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | K20 Pickup | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | K20 Suburban | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | K30 Pickup | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | Kingswood | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Chevrolet | Laguna | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Chevrolet | Laguna | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Chevrolet | Laguna | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Chevrolet | Malibu | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Chevrolet | Malibu | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Chevrolet | Malibu | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | Monte Carlo | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Chevrolet | Monte Carlo | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Chevrolet | Monte Carlo | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Chevrolet | Monte Carlo | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | Nova | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Chevrolet | Nova | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Chevrolet | Nova | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Chevrolet | Nova | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Chevrolet | Townsman | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | GMC | C15/C1500 Pickup | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | GMC | C15/C1500 Suburban | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | GMC | C25/C2500 Pickup | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | GMC | C25/C2500 Suburban | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | GMC | C35/C3500 Pickup | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | GMC | K15/K1500 Pickup | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | GMC | K25/K2500 Pickup | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | GMC | K25/K2500 Suburban | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | GMC | K35/K3500 Pickup | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | GMC | Sprint | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | GMC | Sprint | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | GMC | Sprint | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | GMC | Sprint | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1965 | Oldsmobile | 442 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1966 | Oldsmobile | 442 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1967 | Oldsmobile | 442 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1968 | Oldsmobile | 442 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1969 | Oldsmobile | 442 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1957 | Oldsmobile | 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1957 | Oldsmobile | 98 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1958 | Oldsmobile | 98 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1959 | Oldsmobile | 98 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | 98 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | 98 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Oldsmobile | 98 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Oldsmobile | 98 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Oldsmobile | 98 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Oldsmobile | 98 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Oldsmobile | 98 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Custom Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Custom Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Oldsmobile | Custom Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Oldsmobile | Custom Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Oldsmobile | Custom Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Oldsmobile | Custom Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Oldsmobile | Custom Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1965 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1966 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1967 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1968 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1968 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1969 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1970 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1971 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Oldsmobile | Cutlass | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Oldsmobile | Cutlass Calais | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Oldsmobile | Cutlass Calais | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Oldsmobile | Cutlass Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Oldsmobile | Cutlass Salon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Oldsmobile | Cutlass Salon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Cutlass Salon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Cutlass Salon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Oldsmobile | Cutlass Salon | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1968 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1969 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1970 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1971 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Oldsmobile | Cutlass Supreme | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Oldsmobile | Cutlass Tiara | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1968 | Oldsmobile | Delmont 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1968 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1969 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1970 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1971 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Oldsmobile | Delta 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1965 | Oldsmobile | F85 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1966 | Oldsmobile | F85 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1968 | Oldsmobile | F85 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1969 | Oldsmobile | F85 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1970 | Oldsmobile | F85 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1971 | Oldsmobile | F85 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Oldsmobile | F85 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1957 | Oldsmobile | Fiesta | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1958 | Oldsmobile | Fiesta | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1959 | Oldsmobile | Fiesta | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1960 | Oldsmobile | Fiesta | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1961 | Oldsmobile | Fiesta | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1962 | Oldsmobile | Fiesta | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1963 | Oldsmobile | Fiesta | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1964 | Oldsmobile | Fiesta | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1957 | Oldsmobile | Golden Rocket 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Oldsmobile | Omega | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Oldsmobile | Omega | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Oldsmobile | Omega | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Oldsmobile | Omega | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Omega | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1957 | Oldsmobile | Starfire | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1957 | Oldsmobile | Super 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1958 | Oldsmobile | Super 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1959 | Oldsmobile | Super 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1960 | Oldsmobile | Super 88 | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Oldsmobile | Toronado | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Oldsmobile | Toronado | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Oldsmobile | Toronado | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Oldsmobile | Toronado | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1968 | Oldsmobile | Vista Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1968 | Oldsmobile | Vista Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1969 | Oldsmobile | Vista Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1969 | Oldsmobile | Vista Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1970 | Oldsmobile | Vista Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1971 | Oldsmobile | Vista Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Oldsmobile | Vista Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Oldsmobile | Vista Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Oldsmobile | Vista Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Oldsmobile | Vista Cruiser | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Bonneville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Bonneville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Bonneville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Pontiac | Bonneville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Pontiac | Bonneville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Pontiac | Bonneville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Pontiac | Bonneville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Pontiac | Bonneville | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Catalina | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Catalina | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Catalina | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Pontiac | Catalina | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Pontiac | Catalina | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Pontiac | Catalina | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Pontiac | Catalina | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1980 | Pontiac | Catalina | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Pontiac | Firebird | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Firebird | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Firebird | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Firebird | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Pontiac | Firebird | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1979 | Pontiac | Firebird | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Pontiac | Grand Am | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Pontiac | Grand LeMans | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Pontiac | Grand LeMans | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Grand LeMans | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Grand LeMans | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Grand LeMans | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Pontiac | Grand Prix | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Grand Prix | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Grand Prix | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Grand Prix | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Grand Safari | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Grand Safari | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1978 | Pontiac | Grand Safari | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977,1980 | Pontiac | Laurentian | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Pontiac | LeMans | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Pontiac | LeMans | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | LeMans | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | LeMans | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | LeMans | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1972 | Pontiac | Parisienne | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1973 | Pontiac | Parisienne | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1974 | Pontiac | Parisienne | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Phoenix | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1975 | Pontiac | Ventura | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1976 | Pontiac | Ventura | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads,Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads | |
| 1977 | Pontiac | Ventura | Hyd.; 1500-6500rpm; Adv. Dur. at 0.050 Int/Exh 224/234 Deg.; Lift at Valve Int/Exh 0.496/0.520 in.; Lobe Seps 112 Deg.; Intake Center Line 107 Deg.; Engines Transplanted Into Uncontrolled/Pre-Pollution Vehicle; Adjustable Pushrods Or Rocker Arms Required~ Idle Vacuum at 1000 RPM - 12 inch~ Designed For The Engine Swap Market~ Not Legal For Use On Pollution Controlled Vehicles~ 397hp and 400 ft.-lbs. When Matched w/Manifold 7111 and Stock Iron Heads |