*item may differ from images
Edelbrock part #2992 Victor 18 Degree Spider base is the bedding plate portion of a two-piece (valley plate and spider) manifold system. This Spider base is intended for use with "Conventional" 18-degree SBC heads on a standard deck engine block. This plate is more compatible when using our older 18-degree intakes such as 2955 and 2958 and will require less work for proper fit.
Edelbrock Edelbrock Victor 18 degree 2 Piece Small Block Chevrolet Base Manifold 2992
Specifications:
| Grade Type | Performance |
| CNC Ported | No |
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Basic Operating RPM Range | 5000-8500 |
| Front Maximum Height | 0.010 |
| Gasket Or Seal Included | No |
| Material | Aluminum |
| Finish | Satin |
| Single Or Dual Plane Type | Single |
| Rear Maximum Height | 0.010 |
| Flange Type | 4500 |
| Series | Victor |
| Vehicle Model | Chevrolet |
| Center Maximum Height | 0.010 |
| EGR Port | No |
| Description_ABR | Intake Mnfld |
| Description_INV | Victor 18d 2 Piece SBC Base Manifold |
| Description_LAB | Victor 18-degree 2 Piece SBC Base Manifold |
| Description_ASM | Chevrolet:Small-Block Gen I Race |
| Description_EXT | Edelbrock Victor 18 degree 2 Piece Small Block Chevrolet Base Manifold |
| Description_MKT | Edelbrock part #2992 Victor 18 Degree Spider base is the bedding plate portion of a two-piece (valley plate and spider) manifold system. This Spider base is intended for use with "Conventional" 18-degree SBC heads on a standard deck engine block. This plate is more compatible when using our older 18-degree intakes such as 2955 and 2958 and will require less work for proper fit. |
| Description_TRA | Intended for use with "Conventional" 18 Degree SBC heads on a standard deck engine block |
| Description_TRA | This plate is more compatible when using our older 18 degree intakes such as #2955 and #2958 and will require less work for proper fit |
| Description_TRA | Recommended intake gasket: Fel-Pro: #1254 (base only) |
| Description_DEF | Engine Intake Manifold |