*item may differ from images
Edelbrock part #7535 RPM Air-Gap Dual-Quad is designed for 289-302-347 c.i.d. small-block Fords. This is a dual plane intake manifold which combines dual four-barrel excitement with a well-mannered street manifold. This intake is taller than the low-profile F-28 intake and offer performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower. Carb center to carb center is 6-7/16".
Edelbrock Edelbrock RPM Air-Gap Dual Quad Intake Manifold for Ford 289-347 Small-Block V8 7535
Specifications:
| Material | Aluminum |
| Single Or Dual Plane Type | Dual |
| Vehicle Model | Ford |
| Gasket Or Seal Included | No |
| Series | RPM Air-Gap |
| Center Maximum Height | 5.280 |
| Rear Maximum Height | 5.700 |
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| EGR Port | No |
| Flange Type | 4150 Dual-Quad (4-Barrel Square Bore) |
| Finish | Satin |
| CNC Ported | No |
| Basic Operating RPM Range | 1500-6500 |
| Grade Type | Performance |
| Front Maximum Height | 4.850 |
| Description_TRA | Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Description_DEF | Engine Intake Manifold |
| Description_ABR | Intake Mnfld |
| Description_INV | RPM Air-Gap Dual Quad Ford 8.2 Intake |
| Description_LAB | RPM Air-Gap Dual-Quad Small Block Ford Intake Manifold |
| Description_ASM | Ford:Small-Block:289 (4.7L)-347 (5.7L) |
| Description_EXT | Edelbrock RPM Air-Gap Dual Quad Intake Manifold for Ford 289-347 Small-Block V8 |
| Description_MKT | Edelbrock part #7535 RPM Air-Gap Dual-Quad is designed for 289-302-347 c.i.d. small-block Fords. This is a dual plane intake manifold which combines dual four-barrel excitement with a well-mannered street manifold. This intake is taller than the low-profile F-28 intake and offer performance improvements in the 1500-6500 rpm range. The large runners feature our unique Air-Gap design that separates the runners from the hot engine valley for a cooler, denser charge and more horsepower. Carb center to carb center is 6-7/16". |
| Description_TRA | Recommended intake gasket: Edelbrock #7220 |
| Description_TRA | Manifold height: A-4.85", B-5.70" |
| Description_TRA | Carb pad height: 5.28" |
| Description_TRA | Carb recommendations: Edelbrock AVS2 #1903 and# 1904 or Performer Series #1403 and #1404, 500 cfm. |
| Description_TRA | Port exit dimensions: 1.05" x 1.90" |
| Description_TRA | Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |