*item may differ from images
Edelbrock part #71933 Performer RPM 440 intake manifold is designed for 413-426-440 c.i.d. Chrysler V8's. The dual-plane design results in excellent low-rpm torque and outstanding high-rpm hp. For high-performance street/strip applications. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Edelbrock Edelbrock Performer RPM Intake Manifold for Chrysler 413-426-440 Big-Block V8 71933
Specifications:
| EGR Port | No |
| Flange Type | 4150 |
| Series | Performer RPM |
| Gasket Or Seal Included | No |
| Front Maximum Height | 4.900 |
| Material | Aluminum |
| Grade Type | Performance |
| Single Or Dual Plane Type | Dual |
| Vehicle Model | Chrysler |
| Basic Operating RPM Range | 1500-6500 |
| Center Maximum Height | 5.350 |
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Rear Maximum Height | 5.800 |
| CNC Ported | No |
| Finish | Black Powder Coated |
| Description_ABR | Intake Mnfld |
| Description_INV | Black RPM 440 Chrysler Intake Manifold |
| Description_LAB | Performer RPM Big Block Chrysler 440 Black Intake Manifold |
| Description_ASM | Chrysler:Big-Block RB Series:413 (6.8L)/426 (7.0L)/440 (7.2L) |
| Description_EXT | Edelbrock Performer RPM Intake Manifold for Chrysler 413-426-440 Big-Block V8 |
| Description_MKT | Edelbrock part #71933 Performer RPM 440 intake manifold is designed for 413-426-440 c.i.d. Chrysler V8's. The dual-plane design results in excellent low-rpm torque and outstanding high-rpm hp. For high-performance street/strip applications. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look. |
| Description_TRA | Recommended intake gasket: #7225. |
| Description_TRA | Manifold height: A-4.90", B-5.80" |
| Description_TRA | Carb pad height: 5.35". Manifold is 1.7" taller than stock |
| Description_TRA | Port exit dimensions: 1.13" x 2.09" |
| Description_TRA | Manifold measure 8.75" across block |
| Description_TRA | Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA | Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Description_DEF | Engine Intake Manifold |