*item may differ from images
Edelbrock part #71213 Performer RPM 302 intake manifold is designed for street 289-302 c.i.d. Ford V8's. This dual-plane high rise manifold has excellent high rpm power while retaining throttle response. No provisions for exhaust heated choke. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look.
Edelbrock Edelbrock Performer RPM 302 Intake Manifold for Ford 289-347 Small-Block V8 71213
Specifications:
| Material | Aluminum |
| Gasket Or Seal Included | No |
| Rear Maximum Height | 5.500 |
| Single Or Dual Plane Type | Dual |
| Front Maximum Height | 4.300 |
| Series | Performer RPM |
| Vehicle Model | Ford |
| Center Maximum Height | 4.900 |
| EGR Port | No |
| Basic Operating RPM Range | 1500-6500 |
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| Flange Type | 4150 |
| CNC Ported | No |
| Finish | Black Powder Coated |
| Grade Type | Performance |
| Description_ABR | Intake Mnfld |
| Description_INV | Black RPM SBF 8.2 Deck Intake Manifold |
| Description_LAB | Performer RPM Small Block Ford 302 Black Intake Manifold |
| Description_ASM | Ford:Small-Block Windsor:260 (4.3L)/289 (4.7L)/302 (5.0L) |
| Description_EXT | Edelbrock Performer RPM 302 Intake Manifold for Ford 289-347 Small-Block V8 |
| Description_MKT | Edelbrock part #71213 Performer RPM 302 intake manifold is designed for street 289-302 c.i.d. Ford V8's. This dual-plane high rise manifold has excellent high rpm power while retaining throttle response. No provisions for exhaust heated choke. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com. This manifold offers a durable black power coated finish for long lasting protection and a distinctive look. |
| Description_TRA | Will not fit 255 c.i.d. V8. |
| Description_TRA | Recommended intake gasket: Edelbrock #7220. |
| Description_TRA | Manifold Height: A-4.30", B-5.50" |
| Description_TRA | Carb pad height: 4.90" |
| Description_TRA | Carb recommendations: Edelbrock AVS2 or Performer Series 600-750 cfm. For automatic transmissions use #1483 and #1490 or #1844. |
| Description_TRA | Port exit dimensions: 1.05" x 1.86" |
| Description_TRA | Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA | Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum. |
| Description_DEF | Engine Intake Manifold |