*item may differ from images
As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3-liter turbocharged inline 6 with greater volumes of cool oxygen-rich air for substantial power gains by utilizing our secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. Due to the increased airflow from our intake, the power-curve is extended into the higher RPMs for a noticeable change. The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power-robbing engine compartment heat.
Dinan Dinan Cold Air Intake - 2007-2010 BMW 135i/335i D760-0030
Specifications:
| Brand | Dinan |
| Category | Air and Fuel Delivery |
| Dinan Point Value | 3 |
| Emission Code | 7 |
| Height | 7 |
| Labor Time (Hours) | 2 |
| Length | 29 |
| Max HP Gain | 14 @ 6000 RPM |
| Max Torque (lb-ft) Gain | 16 @ 3400 RPM |
| part type | Air Intake Kit |
| Product Type | Cold Air Intake |
| Sub Category | Service Kits |
| Warning | California Proposition 65 |
| Weight | 11 |
| Width | 17 |
| Description_INV | OBS COLD AIR INTAKE 135/335 E82 13 |
| Description_ASC | Not compatible with vehicles equipped with the M aerodynamic bumper. Dinan Performance Engine Software recommended for optimum performance and drivability. |
| Description_DES | Dinan Cold Air Intake - 2007-2010 BMW 135i/335i |
| Description_EXT | Carbon Fiber - E82/E88/E90/E92/E93 |
| Description_MKT | As boost is increased through the use of performance software, the single factory intake becomes restrictive and the engine is lacking the air it needs to make maximum power. Our cold air intake force feeds the 3-liter turbocharged inline 6 with greater volumes of cool oxygen-rich air for substantial power gains by utilizing our secondary carbon fiber intake. The system is so effective that the carbon fiber inlet air temperature is a full 40 degrees Fahrenheit cooler than the incoming air from the stock inlet. Due to the increased airflow from our intake, the power-curve is extended into the higher RPMs for a noticeable change. The system is a direct replacement for the factory air box lid, employing a hand-crafted carbon fiber unit that also includes a secondary carbon fiber intake tube that captures cool air from the lower grill and includes the shielding for the conical filter to insulate it from power-robbing engine compartment heat. |
| Description_FAB | More Power: Up to + 14 HP @ 6000 RPM, + 16 LB-FT @ 3400 RPM (coupled w/ engine software) |
| Description_FAB | More Power: + 5 HP @ 6000 RPM, + 6 LB-FT @ 3400 RPM |
| Description_FAB | Increased engine output across the power band |
| Description_FAB | Carbon Fiber construction |
| Description_FAB | Sealed system for maximum insulation from power robbing heat |
| Description_FAB | Additional secondary inlet (and filter) for additional air flow |
| Description_FAB | Less restrictive filter element for optimum flow (stock location) |
| Description_FAB | 50 State Emissions Legal: CARB EO D-176-56 |
This Part Fits:
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 2008 | BMW | 135i | Base | |
| 2009 | BMW | 135i | Base | |
| 2010 | BMW | 135i | Base | |
| 2007 | BMW | 335i | Base | |
| 2008 | BMW | 335i | Base | |
| 2009 | BMW | 335i | Base | |
| 2010 | BMW | 335i | Base | |
| 2009 | BMW | 335i xDrive | Base | |
| 2010 | BMW | 335i xDrive | Base | |
| 2007 | BMW | 335xi | Base | |
| 2008 | BMW | 335xi | Base |