*item may differ from images
Built for strength performance and increased travel these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box.
BDS Suspension BDS1911FSL 2021-2023 Ford F150 2in. 2.0 IFP Coilover| BDS upper control arm without Sensor
Specifications:
| Description_ASC | Works with bar pin lower strut mounts. For eye-style lower strut mounts use 2009-13 model kits. |
| Description_ASC | Control arms with sensors are designed to keep the sensor arm in the stock position (the same position as the OE control arm). |
| Description_ASC | Not designed to work with trucks with CCD. |
| Description_ASC | Do NOT hit the aluminum knuckle on later model trucks with a hammer to separate the ball joint. Use the appropriate ball joint separation tool. |
| Description_ASC | For replacement ball joints use BDS081203. The ball joint is directional and must be installed with the dot facing either inward or outward on the vehicle otherwise damage may occur. |
| Description_ASC | Special Service Tool 204-592 is recommended to dislodge the ball joint. |
| Description_DES | 2021-2023 Ford F150 2in. 2.0 IFP Coilover| BDS upper control arm without Sensor |
| Description_EXT | 2021-2023 Ford F150 2in. 2.0 IFP Coilover| BDS upper control arm without Sensor| 2.0 rear shocks |
| Description_FAB | FOX Performance IFP shocks eliminates oil aeration allowing maximum performance from the factory-tuned precision valving |
| Description_FAB | HD Upper control arms provide superior strength and proper alignment |
| Description_FAB | Adjustable height to fine tune |
| Description_FAB | Provides level stance from front to rear |
| Description_FAB | Easy 100% Bolt On installation |
| Description_FAB | FOX shocks are fully serviceable and resistant to corrosion and harsh environments. |
| Description_MKT | Level out your 2021 Ford F150 truck and improve the ride with this 2-inch leveling kit featuring FOX 2.0 coil-over shocks from BDS Suspension. Designed to improve stance performance and capability this kit includes everything necessary to set your truck up right with clearance for up to 35" tires. |
| Description_MKT | Up front the lift kit includes FOX 2.0 Performance Series coil-over shocks and heavy duty tubular upper control arms for increased strength. In the rear this kit utilizes a matching set of FOX 2.0 Performance shocks for the smoothest ride. |
| Description_MKT | FOX 2.0 Coil-Over Shocks |
| Description_MKT | These FOX 2.0 Performance Series coil-overs bring impressive damper performance for great ride on and offroad capability designed as a direct bolt-in replacement for the factory strut. They feature a 2.0" extruded and machined 6061 T6 aluminum body for better heat dispersion along with an internal floating piston (IFP) to eliminate oil aeration FOX's proprietary internals 5/8" hard chrome plated heat treated alloy shaft and come preloaded with springs and top-plate for easy installation. |
| Description_MKT | HD Upper Control Arms |
| Description_MKT | Built for strength performance and increased travel these upper control arms are ready to bolt-in with most leveled/lifted trucks. They use 1.5" OD x .120-wall tubular construction with an indexed ball joint cup to correct the ball joint positioning allowing additional down travel and camber adjustment. At the frame mounting ends are durometer-specific rubber bushings for maintenance-free operation while at the other end a quality greaseable ball joints for smooth quiet operation and superior durability. Arms are finished in a durable black powder coat with a billet aluminum dust cap ready for installation right out of the box. |
| Description_SHO | 2 inch leveling kit |
| Description_DEF | Suspension Lift Kit |
This Part Fits:
| Year | Make | Model | Submodel | Notes |
|---|---|---|---|---|
| 2021 | Ford | F-150 | King Ranch | |
| 2022 | Ford | F-150 | King Ranch | |
| 2023 | Ford | F-150 | King Ranch | |
| 2021 | Ford | F-150 | Lariat | |
| 2022 | Ford | F-150 | Lariat | |
| 2023 | Ford | F-150 | Lariat | |
| 2021 | Ford | F-150 | Limited | |
| 2022 | Ford | F-150 | Limited | |
| 2023 | Ford | F-150 | Limited | |
| 2021 | Ford | F-150 | Platinum | |
| 2022 | Ford | F-150 | Platinum | |
| 2023 | Ford | F-150 | Platinum | |
| 2021 | Ford | F-150 | Police Responder | |
| 2022 | Ford | F-150 | Police Responder | |
| 2023 | Ford | F-150 | Police Responder | |
| 2021 | Ford | F-150 | SSV | |
| 2022 | Ford | F-150 | SSV | |
| 2023 | Ford | F-150 | SSV | |
| 2021 | Ford | F-150 | XL | |
| 2022 | Ford | F-150 | XL | |
| 2023 | Ford | F-150 | XL | |
| 2021 | Ford | F-150 | XLT | |
| 2022 | Ford | F-150 | XLT | |
| 2023 | Ford | F-150 | XLT |