Edelbrock Small-Block Chevy, Chrome Plasma 2703-CP

Edelbrock part #2703-CP Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. This intake manifold combines a modern runner design with a front mounted oil fill tube. The included manifold mounted oil fill tube and breather make it easy to add oil and allows the use of our breatherless Classic valve covers. The PN 2703-CP has a runner design that's tuned for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. This Chrome Plasma version comes with a brilliant bright finish that is durable and easy to maintain.

Edelbrock Small-Block Chevy, Chrome Plasma 2703-CP

Specifications:

Vehicle Model	Chevrolet
Series	Performer
RGL	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
10	Aluminum
353	No
6642	Dual Plane
6643	3.74
6644	4.27
6645	4.8
9063	No
EGR Port	No
Finish	Chrome Plasma
Basic Operating RPM Range	Idle-5500
Flange Type	4150
Grade Type	Performance
Description_ABR	INT MAN CHR
Description_INV	Manifold
Description_INV	SBC Perf EPS Chrome Plasma
Description_LAB	Performer EPS Intake Manifold w/Oil Fill Tube
Description_LAB	Small-Block Chevy, Chrome Plasma
Description_DES	Performer EPS Intake Manifold w/Oil Fill Tube
Description_DES	Small-Block Chevy, Chrome Plasma
Description_SHP	None
Description_ASM	Chevrolet:Small-Block Gen I:265 /283 /302 /305 /307 /327/350 /400
Description_EXT	Edelbrock Performer EPS #2703-CP Intake Manifold for 1955-86 262-400 Small-Block Chevrolet V8, Accepts a 4150-Style Square-Bore Carburetor. Includes Oil Fill tube and Breather. Chrome Plasma Finish. Non-EGR.
Description_MKT	Edelbrock part #2703-CP Performer EPS intake manifold is for 1986 and earlier 262-400 cubic-inch Chevys. Design is optimized for Edelbrock EPS or AVS2 carburetors, although any 4150 style carburetor will fit. This intake manifold combines a modern runner design with a front mounted oil fill tube. The included manifold mounted oil fill tube and breather make it easy to add oil and allows the use of our breatherless Classic valve covers. The PN 2703-CP has a runner design that's tuned for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. This Chrome Plasma version comes with a brilliant bright finish that is durable and easy to maintain.
Description_TRA	Manifold ht: A-3.74", B-4.80"
Description_TRA	Carb pad height: 4.27"
Description_TRA	Carb recommendations: Edelbrock AVS2 or Performer Series 500-650 cfm
Description_TRA	Port exit dimensions: 1.15" x 1.87".
Description_TRA	Recommended intake gasket: Edelbrock #7201.
Description_TRA	Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
Description_TRA	Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.
Description_TRA	NPT/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal. NPT/Pipe thread is a tapered thread. Edelbrock #8504 intake manifold bolt kit which includes hardened washers to ensure proper torque and prevent galling of the aluminum is highly recommended. Will not fit under stock Corvette hood.
Description_DEF	Engine Intake Manifold