*item may differ from images
Edelbrock part #2716-CP Performer EPS intake manifold is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or AVS2 series carburetors. The runner design is "tuned" for peak torque at 3500 rpm on a 350-inch engine and is ideal for power from off-idle to 5500 rpm. Dyno tests showed gains averaging 5+ ft-lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. The PN 2716-CP version comes with a brilliant Chrome Plasma finish that is durable and easy to maintain. The Plasma finishes are applied by a fully automated 7 stage prewash and 4 stage finish. A durable clear powder coat finishes the process.
Edelbrock Edelbrock Perf EPS Manifold for Small-Block Chevy Vortec, Chrome Plasma Finish 2716-CP
Specifications:
| Vehicle Model | Chevrolet |
| Series | Performer |
| RGL | WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| 10 | Aluminum |
| 353 | No |
| 6642 | Dual Plane |
| 6643 | 3.95 |
| 6644 | 4.52 |
| 6645 | 5.08 |
| 9063 | No |
| EGR Port | No |
| Finish | Chrome Plasma |
| Basic Operating RPM Range | Idle-5500 |
| Flange Type | 4150 |
| Grade Type | Performance |
| Description_ABR | Intake Mnfld |
| Description_INV | Manifold |
| Description_INV | SB Chevy Perfmr Chrome Plasma |
| Description_LAB | Edelbrock Perf EPS Manifold for Small-Block Chevy Vortec, Chrome Plasma Finish |
| Description_DES | Edelbrock Perf EPS Manifold for Small-Block Chevy Vortec, Chrome Plasma Finish |
| Description_SHP | None |
| Description_ASM | Chevy Small-Block Vortec |
| Description_ASM | Chevy Small-Block Vortec |
| Description_EXT | Edelbrock Part #2716-CP Performer EPS intake manifold is designed for Small-Block Chevy with Vortec or E-tec style cylinder heads. Perfect for any builder looking for optimum idle-5500 rpm performance with a beautiful Chrome Plasma finish. |
| Description_MKT | Edelbrock part #2716-CP Performer EPS intake manifold is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or AVS2 series carburetors. The runner design is "tuned" for peak torque at 3500 rpm on a 350-inch engine and is ideal for power from off-idle to 5500 rpm. Dyno tests showed gains averaging 5+ ft-lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. The PN 2716-CP version comes with a brilliant Chrome Plasma finish that is durable and easy to maintain. The Plasma finishes are applied by a fully automated 7 stage prewash and 4 stage finish. A durable clear powder coat finishes the process. |
| Description_TRA | Manifold ht: A-3.95", B-5.02" |
| Description_TRA | Carb pad height: 4.52" |
| Description_TRA | Carb recommendations: Edelbrock AVS2, Performer Series. Port exit dimensions: 2.05" tall with slanted side walls |
| Description_TRA | Recommended intake gasket: Edelbrock #7235 or GM #89017465 |
| Description_TRA | Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS. |
| Description_TRA | Use #8516 Edelbrock bolt kit which includes hardened washers to prevent galling of the alumnum manifold |
| Description_TRA | Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage. Will not fit under stock Corvette hood. Use Edelbrock Vortec throttle bracket #8032. |
| Description_DEF | Engine Intake Manifold |