*item may differ from images
Edelbrock E-Series Cylinder Head Bolt Kit #85332 is designed for use on Jeep 4.0L inline six-cylinder engines using -inch head bolts. This high-quality E-Series bolt kit will pair perfectly with Edelbrock's Jeep Cylinder Head #50159 and #50169 and will also fit the 4.2L inline six-cylinder engine if using Edelbrock heads. E-Series bolts have a yield tensile strength of 190,000 PSI for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. E-Series Cylinder Head Bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock E stamped into the head.
Edelbrock Edelbrock E-Series Cylinder Head Bolt Kit #85332 for Jeep 4.0L Inline Six Engine 85332
Specifications:
| RGL | WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov. |
| 9 | Hex |
| 10 | 8740 Chromoly |
| 546 | Coarse |
| 557 | 0.5 |
| 3072 | Yes |
| Finish | Black Oxide |
| Grade Type | Performance |
| Quantity | Kit |
| Length | (7) 3.75 in, (7) 4.50 |
| Description_ABR | HeadBoltKit |
| Description_INV | Edelbrock Cylinder Head Bolt Kit #85332 |
| Description_LAB | Edelbrock E-Series Cylinder Head Bolt Kit #85332 for Jeep 4.0L Inline Six Engine |
| Description_DES | Edelbrock E-Series Cylinder Head Bolt Kit #85332 for Jeep 4.0L Inline Six Engine |
| Description_SHP | None |
| Description_ASM | Jeep:Inline-Six:242 (4.0L) |
| Description_EXT | Edelbrock #85332 Head Bolt Kit is for Jeep 4.0L inline six engines using 1/2" head bolts with Edelbrock #50159 and #50169 Cylinder Heads. This Head Bolt Kit will also fit AMC/Jeep 4.2L Inline Six if using our cylinder heads. |
| Description_MKT | Edelbrock E-Series Cylinder Head Bolt Kit #85332 is designed for use on Jeep 4.0L inline six-cylinder engines using -inch head bolts. This high-quality E-Series bolt kit will pair perfectly with Edelbrock's Jeep Cylinder Head #50159 and #50169 and will also fit the 4.2L inline six-cylinder engine if using Edelbrock heads. E-Series bolts have a yield tensile strength of 190,000 PSI for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. E-Series Cylinder Head Bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock E stamped into the head. |
| Description_FAB | For Jeep 4.0L inline six with -inch bolt diameter |
| Description_FAB | Yield tensile strength of 190,000 PSI for strength |
| Description_FAB | Heat treating with rolled threads for superior form & strength |
| Description_FAB | Black-oxide finish with sealer |
| Description_FAB | Edelbrock E logo stamped on bolt head. |
| Description_TRA | The Edelbrock #85332 is made specifically for Jeep 4.0L |
| Description_TRA | Installation is the same as for original equipment cylinder heads. |
| Description_TRA | Consult service manual for specific procedures, if necessary. |
| Description_TRA | Be sure that the surface of the block and the surface of the head are thoroughly cleaned to remove any oily film before installation. |
| Description_TRA | Use alcohol or lacquer thinner on a lint-free rag to clean. Apply oil or suitable thread lubricant to head bolt threads and the underside of bolt heads and washers. |
| Description_TRA | Torque cylinder head bolts in three steps following the factory tightening sequence |
| Description_DEF | Engine Cylinder Head Bolt Set |