{"product_id":"holley-8-x-8-hydramat-cross-16-103","title":"Holley 8\" x 8\" HydraMat, Cross 16-103","description":"HydraMats™ are available in various sizes and shapes to fit a variety of stock fuel tanks and\/or race fuel cells.\u003cp\u003e\u003cbr\u003eHolley 8\" x 8\" HydraMat, Cross 16-103 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eHYDRAMAT (8X8 CROSS) CENTER OUT - 3\/8 IN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASC\u003c\/td\u003e\n\u003ctd\u003eThis to fit flat bottom rectangular style fuel cells with minimum dimensions of 8\" long and 8\" wide crossFor best performance, the return fuel should be discharged near the pick-up of the HydraMat at a minimum distance of 1 inch above the mat.HydraMats with a female NPT thread do not require the use of a sealing paste or tape. Use of a sealing paste or tape could result in fuel pump failure.For in-tank fixed stud mounting, Click Bond stud kits are recommended.  Kits can be purchased from aircraft supply retailers such as Aircraft Spruce.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003e8\" x 8\" HydraMat, Cross\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eCenter outlet pick-up with -3\/8\" NPSF fitting. Fitting location designed for universal use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThe amazing HydraMat™ is Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling.  HydraMat is the solution!\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eSurface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eHydraMats™ are available in various sizes and shapes to fit a variety of stock fuel tanks and\/or race fuel cells.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003ePatent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGreatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and\/or engine stalling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003ePerfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eSurface tension and fluid wicking allow the HydraMat™ to continue to draw fuel from the tank or cell even when part of the mat uncovered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAs an area of the HydraMat™ is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eUnique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eEliminates the need for specialty reservoirs, sumps  and pick up pumps saving cost and greatly reducing complexity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAlso acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCan be folded and compressed for easy installation through a variety of fuel cell openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHydraMats™ are also available in other sizes and shapes to fit a variety of stock fuel tanks and\/or race fuel cells\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eWorks with Alcohol, Ethanol, Methanol, and E-85 fuels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eWorks with 2-cycle oil blends as high as 20:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eNot for use with most oils (see previous point for exceptions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eNot for use with diesel fuels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eHYDRAMAT (8X8 CROSS) CENTER OUT - 3\/8 IN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASC\u003c\/td\u003e\n\u003ctd\u003eThis to fit flat bottom rectangular style fuel cells with minimum dimensions of 8\" long and 8\" wide crossFor best performance, the return fuel should be discharged near the pick-up of the HydraMat at a minimum distance of 1 inch above the mat.HydraMats with a female NPT thread do not require the use of a sealing paste or tape. Use of a sealing paste or tape could result in fuel pump failure.For in-tank fixed stud mounting, Click Bond stud kits are recommended.  Kits can be purchased from aircraft supply retailers such as Aircraft Spruce.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003e8\" x 8\" HydraMat, Cross\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eCenter outlet pick-up with -3\/8\" NPSF fitting. Fitting location designed for universal use.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThe amazing HydraMat™ is Holley's patent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells. During hard cornering, acceleration, stopping, inclines, and low fuel conditions fuel runs away from the fuel pick up which introduces air into the system resulting in poor engine performance and even stalling.  HydraMat is the solution!\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eSurface tension and fluid wicking are the secrets of the HydraMat, giving it the amazing ability to draw from nearly any area that has contact with fuel and then store it in its internal reservoir. As an area of the HydraMat is uncovered, the tiny pores of the media seal off through surface tension, forcing fuel to be contained in the reservoir and drawn from other areas of the mat where fuel continues to be available. The sheer size and coverage area of the HydraMat allows it to pull fuel from virtually any area in the tank or cell eliminating the need for specialty reservoirs and pick up pumps saving cost and greatly reducing complexity.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eHydraMats™ are available in various sizes and shapes to fit a variety of stock fuel tanks and\/or race fuel cells.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003ePatent pending design that solves the problems associated with traditional fuel pick-ups in stock fuel tanks as well as racing fuel cells\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eGreatly reduces the potential for air to enter into the fuel system which can result in poor engine performance and\/or engine stalling\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003ePerfect for vehicles experiencing fuel starvation during hard cornering, acceleration, stopping, inclines, and low fuel conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eSurface tension and fluid wicking allow the HydraMat™ to continue to draw fuel from the tank or cell even when part of the mat uncovered\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAs an area of the HydraMat™ is uncovered, tiny pores in the media seal off through surface tension, forcing fuel to be drawn from other areas of the mat where fuel continues to be available\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eUnique internal reservoir assists in keeping fuel available at the pickup even under extreme fuel slosh conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eEliminates the need for specialty reservoirs, sumps  and pick up pumps saving cost and greatly reducing complexity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAlso acts as a 15 micron pre-filter eliminating the need for a separate filter before the fuel pump\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCan be folded and compressed for easy installation through a variety of fuel cell openings\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHydraMats™ are also available in other sizes and shapes to fit a variety of stock fuel tanks and\/or race fuel cells\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eWorks with Alcohol, Ethanol, Methanol, and E-85 fuels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eWorks with 2-cycle oil blends as high as 20:1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eNot for use with most oils (see previous point for exceptions)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eNot for use with diesel fuels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHolley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCategory\u003c\/td\u003e\n\u003ctd\u003eAir and Fuel Delivery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003ctd\u003eBeige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmission Code\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Size\u003c\/td\u003e\n\u003ctd\u003e3\/8\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3390\u003c\/td\u003e\n\u003ctd\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e8 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMicron\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet\u003c\/td\u003e\n\u003ctd\u003eCenter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epart type\u003c\/td\u003e\n\u003ctd\u003eFuel Tank Pickup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHydraMats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3744\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSub Category\u003c\/td\u003e\n\u003ctd\u003eFuel Pumps and Related Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eManufacturer's Limited 90 Day Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eHolley\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCategory\u003c\/td\u003e\n\u003ctd\u003eAir and Fuel Delivery\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e17\u003c\/td\u003e\n\u003ctd\u003eBeige\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEmission Code\u003c\/td\u003e\n\u003ctd\u003e5\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitting Size\u003c\/td\u003e\n\u003ctd\u003e3\/8\" NPT\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3390\u003c\/td\u003e\n\u003ctd\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLength\u003c\/td\u003e\n\u003ctd\u003e8 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMicron\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutlet\u003c\/td\u003e\n\u003ctd\u003eCenter\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003epart type\u003c\/td\u003e\n\u003ctd\u003eFuel Tank Pickup\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eHydraMats\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3744\u003c\/td\u003e\n\u003ctd\u003e15\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSub Category\u003c\/td\u003e\n\u003ctd\u003eFuel Pumps and Related Components\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWarranty\u003c\/td\u003e\n\u003ctd\u003eManufacturer's Limited 90 Day Warranty\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWidth\u003c\/td\u003e\n\u003ctd\u003e8 inches\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Holley","offers":[{"title":"Default Title","offer_id":46683453948060,"sku":"BBVL_16-103","price":478.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0440\/6729\/1292\/files\/16-103corner2ren.jpg?v=1776305748","url":"https:\/\/www.mypartsguy.ca\/products\/holley-8-x-8-hydramat-cross-16-103","provider":"My Parts Guy MPG Auto","version":"1.0","type":"link"}