{"product_id":"edelbrock-engine-intake-manifold-2901","title":"Edelbrock Engine Intake Manifold 2901","description":"Edelbrock part #2901 Victor Jr. Sportsman 2V intake manifold is a dedicated design for the 2V racer and provides outstanding performance from 3500 to 7000 rpm. The runners are sized especially for 2V racing engines for the ultimate combination of torque and horsepower with better fuel distribution. An extra tall carburetor pad eliminates the need for spacers, and rear water outlets allow for a four corner coolant flow path if desired. It features dual distributor clamp locations, and port exits are sized to match cast iron Chevrolet Bowtie heads. Manifold accept standard restrictor plates and carb adapters. This manifold is a single-plane, high-rise intake designed for maximum race-winning power at higher engine speeds.\u003cp\u003e\u003cbr\u003eEdelbrock Engine Intake Manifold 2901 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC Ported\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Or Dual Plane Type\u003c\/td\u003e\n\u003ctd\u003eSingle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Maximum Height\u003c\/td\u003e\n\u003ctd\u003e5.950\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRGL\u003c\/td\u003e\n\u003ctd\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eVictor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Model\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Or Seal Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter Maximum Height\u003c\/td\u003e\n\u003ctd\u003e5.950\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Maximum Height\u003c\/td\u003e\n\u003ctd\u003e5.950\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Type\u003c\/td\u003e\n\u003ctd\u003e2-Barrel 4-Bolt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEGR Port\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasic Operating RPM Range\u003c\/td\u003e\n\u003ctd\u003e3500-7000\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade Type\u003c\/td\u003e\n\u003ctd\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ABR\u003c\/td\u003e\n\u003ctd\u003eIntake Mnfld\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eVictor Jr Sportsman 2V SBC Intake\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003eVictor Jr. Sportsman 2V 23 Degree Intake Manifold Small-Block Chevy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASM\u003c\/td\u003e\n\u003ctd\u003eChevrolet:Small-Block Gen I:262 (4.3L)\/265 (4.3L)\/267 (4.4L)\/283 (4.6L)\/302 (4.9L)\/305 (5.0L)\/307 (5.0L)\/327 (5.4L)\/350 (5.7L)\/400 (6.6L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eEdelbrock Victor Jr. Sportsman 2V 23 Degree Intake Manifold For Chevrolet 262-400 Small-Block V8\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eEdelbrock part #2901 Victor Jr. Sportsman 2V intake manifold is a dedicated design for the 2V racer and provides outstanding performance from 3500 to 7000 rpm. The runners are sized especially for 2V racing engines for the ultimate combination of torque and horsepower with better fuel distribution. An extra tall carburetor pad eliminates the need for spacers, and rear water outlets allow for a four corner coolant flow path if desired. It features dual distributor clamp locations, and port exits are sized to match cast iron Chevrolet Bowtie heads. Manifold accept standard restrictor plates and carb adapters. This manifold is a single-plane, high-rise intake designed for maximum race-winning power at higher engine speeds.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eRecommended intake gasket: Edelbrock #7217 or Fel-Pro #1206\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eCarburetor pad height = 5.98\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eCarb recommendations: Holley #0-4412 (500 cfm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eNo provisions for exhaust heated chokes or EGR.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eUse RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eHardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eSealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eNPT\/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eTo ensure maximum performance and a proper seal, Edelbrock gaskets which are specifically designed and manufactured for use with Edelbrock parts must be used.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eProper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eEach intake runner should be matched to the cylinder head port size or Fel-Pro gasket #1206 on all four sides of runner exit.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eManifold comes with special carb gasket matching plenum flange.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eEngine Intake Manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":45112184668316,"sku":"BDVJ_2901","price":709.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0440\/6729\/1292\/files\/2ea1217447671.jpg?v=1752402347","url":"https:\/\/www.mypartsguy.ca\/products\/edelbrock-engine-intake-manifold-2901","provider":"My Parts Guy MPG Auto","version":"1.0","type":"link"}