{"product_id":"edelbrock-engine-intake-manifold-2506","title":"Edelbrock Engine Intake Manifold 2506","description":"Edelbrock part #2506 Performer RPM Q-Jet marine intake manifold is designed for 1987-95 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. The Edelbrock Performer RPM Q-Jet #2506 intake manifold is designed specifically for demanding marine applications and delivers maximum power and a broad torque curve for high-performance marine. Delivers maximum power and a broad torque curve for high-performance marine. Carb pad will accept square-bore carbs without adapters. The Performer RPM Q-Jet marine intake manifold features brass lined front water crossover and brass flange inserts to cover the rear water openings.\u003cp\u003e\u003cbr\u003eEdelbrock Engine Intake Manifold 2506 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Maximum Height\u003c\/td\u003e\n\u003ctd\u003e5.250\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade Type\u003c\/td\u003e\n\u003ctd\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC Ported\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Or Seal Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Maximum Height\u003c\/td\u003e\n\u003ctd\u003e4.200\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003eMarine\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Or Dual Plane Type\u003c\/td\u003e\n\u003ctd\u003eDual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEGR Port\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Model\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasic Operating RPM Range\u003c\/td\u003e\n\u003ctd\u003e1500-6500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRGL\u003c\/td\u003e\n\u003ctd\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter Maximum Height\u003c\/td\u003e\n\u003ctd\u003e4.720\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Type\u003c\/td\u003e\n\u003ctd\u003e4150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ABR\u003c\/td\u003e\n\u003ctd\u003eIntake Mnfld\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eMarine RPM SBC intake Manifold 1987-95\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003ePerformer RPM 4V\/Q-JET Marine Intake Manifold for 87-95 Small-Block Chevy\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASM\u003c\/td\u003e\n\u003ctd\u003eChevrolet:Small-Block Gen I:305 (5.0L)\/350 (5.7L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003ePerformer RPM Q-JET Marine Intake Manifold For 1987-95 Small-Block Chevrolet 262-400 V8's. All Cooling Water Passages are Lined with Brass to Prevent Corrosion. The Carb Pads Accept Either Q-Jet or Square-Bore Marine Carburetors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eEdelbrock part #2506 Performer RPM Q-Jet marine intake manifold is designed for 1987-95 262-400 c.i.d. Chevy V8's for spread-bore (Q-Jet) or square-bore carbs. The Edelbrock Performer RPM Q-Jet #2506 intake manifold is designed specifically for demanding marine applications and delivers maximum power and a broad torque curve for high-performance marine. Delivers maximum power and a broad torque curve for high-performance marine. Carb pad will accept square-bore carbs without adapters. The Performer RPM Q-Jet marine intake manifold features brass lined front water crossover and brass flange inserts to cover the rear water openings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eManifold ht: A-4.20\", B-5.25\" (.70\" taller than #2101)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eCarb pad height: 4.27\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eCarb recommendations: Edelbrock #1409 or #1410\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003ePort exit dimensions: 1.16\" x 1.92\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eRecommended intake gasket: GM #10159409\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eUse RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eUse #8504 Edelbrock bolt kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eSealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eNPT\/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eDO NOT OVERTIGHTEN NPT\/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT\/Pipe thread is a tapered thread.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eHardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eWill not fit under stock Corvette hood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eEdelbrock does not recommend the use of an economy type carburetor such as the Performer series #1406 or #1411 on Performer RPM Intake Manifolds. Economy type carburetors are calibrated lean for fuel economy and will not perform properly on this style of intake.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eA carb flange and plenum design that works well with spread-bore (Q-Jet) or square-bore carburetors without the need for adaptors.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eHas provision for exhaust heated divorced choke for Q-Jet Carbs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eUse rod #9172 for divorced choke with Q-Jet.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eEven though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eProper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eEngine Intake Manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":45112176476316,"sku":"BDVJ_2506","price":838.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0440\/6729\/1292\/files\/b7aea2e014ef1.jpg?v=1774536233","url":"https:\/\/www.mypartsguy.ca\/products\/edelbrock-engine-intake-manifold-2506","provider":"My Parts Guy MPG Auto","version":"1.0","type":"link"}