{"product_id":"edelbrock-engine-intake-manifold-2116","title":"Edelbrock Engine Intake Manifold 2116","description":"Edelbrock part #2116 Performer intake manifold is based on the popular and powerful Edelbrock #2101, this dual-plane intake is designed for the street rod, industrial and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or the Edelbrock E-Tec aluminum heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. Manifold has provisions for external water bypass and may be used on either Vortec blocks or 1995 and earlier blocks. No provision for exhaust heated chokes.\u003cp\u003e\u003cbr\u003eEdelbrock Engine Intake Manifold 2116 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrade Type\u003c\/td\u003e\n\u003ctd\u003ePerformance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003eAluminum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGasket Or Seal Included\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSingle Or Dual Plane Type\u003c\/td\u003e\n\u003ctd\u003eDual\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCenter Maximum Height\u003c\/td\u003e\n\u003ctd\u003e4.570\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Type\u003c\/td\u003e\n\u003ctd\u003e4150\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eEGR Port\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRGL\u003c\/td\u003e\n\u003ctd\u003eWARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVehicle Model\u003c\/td\u003e\n\u003ctd\u003eChevrolet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBasic Operating RPM Range\u003c\/td\u003e\n\u003ctd\u003eIdle-5500\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRear Maximum Height\u003c\/td\u003e\n\u003ctd\u003e5.280\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSeries\u003c\/td\u003e\n\u003ctd\u003ePerformer\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCNC Ported\u003c\/td\u003e\n\u003ctd\u003eNo\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFront Maximum Height\u003c\/td\u003e\n\u003ctd\u003e3.870\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ABR\u003c\/td\u003e\n\u003ctd\u003eIntake Mnfld\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003ePerformer Vortec SBC Intake Manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_LAB\u003c\/td\u003e\n\u003ctd\u003ePerformer Intake Manifold for Small-Block Chevy w\/Vortec Heads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_ASM\u003c\/td\u003e\n\u003ctd\u003eChevrolet:Small-Block Gen I Vortec:262 (4.3L)\/265 (4.3L)\/267 (4.4L)\/283 (4.6L)\/302 (4.9L)\/305 (5.0L)\/307 (5.0L)\/327 (5.4L)\/350 (5.7L)\/400 (6.6L)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eEdelbrock Performer Vortec Intake Manifold for all Small-Block Chevrolet 262-400 c.i.d Engines with 1996+ L31 Vortec Cylinder Heads \u0026amp; all Modern Marine and Industrial Engines. Accepts Q-Jet or 4150-Style Square-Bore Carburetors. Non-EGR\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eEdelbrock part #2116 Performer intake manifold is based on the popular and powerful Edelbrock #2101, this dual-plane intake is designed for the street rod, industrial and engine swap market utilizing 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or the Edelbrock E-Tec aluminum heads. Edelbrock's Patented Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response from off-idle through 5500rpm. Manifold has provisions for external water bypass and may be used on either Vortec blocks or 1995 and earlier blocks. No provision for exhaust heated chokes.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eRecommended intake gasket: Edelbrock #7235\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eManifold ht: A-3.87\", B-5.28\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eCarb pad height: 4.57\"\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eCarb recommendations: OEM 4-Bbl (pre-1981, Electric choke ONLY) Use #8032 throttle bracket. Edelbrock AVS2 Series or Performer Series 500-650cfm, use bracket #8032 for 1972-78.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003ePort exit dimensions: 2.05\" tall with slanted side walls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eUse RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eSealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eNPT\/Pipe thread fittings require the use of Teflon tape or paste on threads to ensure proper seal.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eDO NOT OVERTIGHTEN NPT\/Pipe fittings, this may cause the aluminum to crack around the fitting boss. NPT\/Pipe thread is a tapered thread.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eHardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eStock brackets will require modification to fit the upright manifold bolt holes.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eWill not fit under stock Corvette hood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eEven though manifolds are compatible with EGR systems, this does not mean they are legal for use on emissions controlled vehicles. Check local laws for legality.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TRA\u003c\/td\u003e\n\u003ctd\u003eProper installation is the responsibility of the installer. Improper installation will void your warranty and may result in poor performance and engine or vehicle damage.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eEngine Intake Manifold\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Edelbrock","offers":[{"title":"Default Title","offer_id":45112157536412,"sku":"BDVJ_2116","price":490.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0440\/6729\/1292\/files\/a1a53419985ba.jpg?v=1774574853","url":"https:\/\/www.mypartsguy.ca\/products\/edelbrock-engine-intake-manifold-2116","provider":"My Parts Guy MPG Auto","version":"1.0","type":"link"}