{"title":"Heat Shield Insulator","description":null,"products":[{"product_id":"heatshield-products-shields-up-to-9-of-heat-on-and-off-road-application-resists-the-elements-180020","title":"Heatshield Products Shields up to 9% of heat, On and off-road application, Resists the elements 180020","description":"Sticky(TM) Shield is the ultimate way to stop heat from radiating into the drivers compartment of your ride. Made from a dense layer of 1\/8 fiberglass insulation (not poly) shielded by a rugged layer of .3 thick aluminum, Sticky Shield may be cleaned after installation and is resistant to the elements. The heavy-duty peel and stick adhesive will bond to almost any clean surface (not recommended for unfinished fiberglass or carbon). It is the perfect radiant heat shield for transmission tunnels, mufflers, catalytic converters, DPF s, turbos, downpipes, and exhaust system heat. This Sticky Shield can be used with less than 1 of airspace, however when used with 1 or more airspace, it is capable of shielding over 9% of heat. Did that set of long tube headers on your Mustang, Camaro, Challenger, or tuner move your catalytic converter where there are not any factory heat shields? Use Sticky Shield to stop the heat! That Jeep getting some serious heat in the transmission tunnel or from the cat, Sticky Shield it away! Sticky Shield is asbestos free. This product is designed to be used UNDER the vehicle on the floor pan, firewall, transmission tunnel, etc. it is not designed to be used under the carpet. Kits include Cool-Foil Tape(TM) to seal seams when putting two of these heat shields together and protect the edges of Sticky Shield. Please note, this product ships folded keep costs down. You may see bends in it when it is received, bends will become minimally visible after installation\u003cp\u003e\u003cbr\u003eHeatshield Products Shields up to 9% of heat, On and off-road application, Resists the elements 180020 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eShields up to 9% of heat, On and off-road application, Resists the elements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eMade from ceramic insulation shielded by a rugged layer of aluminum, HP Sticky Shield may be pressure washed after installation and is resistant to the elements. With 1 inch or more airspace, shields up 9 percent of radiant heat away.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating reflective temperature of 11F, 2F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reflecting over 9 percent of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFlexible, bends and conforms to almost any shape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCan be cleaned after installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eSticky Heat Shield 1\/8 x 12 x 23 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eSticky(TM) Shield is the ultimate way to stop heat from radiating into the drivers compartment of your ride. Made from a dense layer of 1\/8 fiberglass insulation (not poly) shielded by a rugged layer of .3 thick aluminum, Sticky Shield may be cleaned after installation and is resistant to the elements. The heavy-duty peel and stick adhesive will bond to almost any clean surface (not recommended for unfinished fiberglass or carbon). It is the perfect radiant heat shield for transmission tunnels, mufflers, catalytic converters, DPF s, turbos, downpipes, and exhaust system heat. This Sticky Shield can be used with less than 1 of airspace, however when used with 1 or more airspace, it is capable of shielding over 9% of heat. Did that set of long tube headers on your Mustang, Camaro, Challenger, or tuner move your catalytic converter where there are not any factory heat shields? Use Sticky Shield to stop the heat! That Jeep getting some serious heat in the transmission tunnel or from the cat, Sticky Shield it away! Sticky Shield is asbestos free. This product is designed to be used UNDER the vehicle on the floor pan, firewall, transmission tunnel, etc. it is not designed to be used under the carpet. Kits include Cool-Foil Tape(TM) to seal seams when putting two of these heat shields together and protect the edges of Sticky Shield. Please note, this product ships folded keep costs down. You may see bends in it when it is received, bends will become minimally visible after installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eStick-On Heat Shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003eThis Part Fits:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/table\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111099261084,"sku":"BHCF_180020","price":158.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-shields-up-to-9-of-heat-on-and-off-road-application-resists-the-elements-180021","title":"Heatshield Products Shields up to 9% of heat, On and off-road application, Resists the elements 180021","description":"Sticky(TM) Shield is the ultimate way to stop heat from radiating into the drivers compartment of your ride. Made from a dense layer of 1\/8 fiberglass insulation (not poly) shielded by a rugged layer of .3 thick aluminum, Sticky Shield may be cleaned after installation and is resistant to the elements. The heavy-duty peel and stick adhesive will bond to almost any clean surface (not recommended for unfinished fiberglass or carbon). It is the perfect radiant heat shield for transmission tunnels, mufflers, catalytic converters, DPF s, turbos, downpipes, and exhaust system heat. This Sticky Shield can be used with less than 1 of airspace, however when used with 1 or more airspace, it is capable of shielding over 9% of heat. Did that set of long tube headers on your Mustang, Camaro, Challenger, or tuner move your catalytic converter where there are not any factory heat shields? Use Sticky Shield to stop the heat! That Jeep getting some serious heat in the transmission tunnel or from the cat, Sticky Shield it away! Sticky Shield is asbestos free. This product is designed to be used UNDER the vehicle on the floor pan, firewall, transmission tunnel, etc. it is not designed to be used under the carpet. Kits include Cool-Foil Tape(TM) to seal seams when putting two of these heat shields together and protect the edges of Sticky Shield. Please note, this product ships folded keep costs down. You may see bends in it when it is received, bends will become minimally visible after installation\u003cp\u003e\u003cbr\u003eHeatshield Products Shields up to 9% of heat, On and off-road application, Resists the elements 180021 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eShields up to 9% of heat, On and off-road application, Resists the elements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eMade from ceramic insulation shielded by a rugged layer of aluminum, HP Sticky Shield may be pressure washed after installation and is resistant to the elements. With 1 inch or more airspace, shields up 9 percent of radiant heat away.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating reflective temperature of 11F, 2F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reflecting over 9 percent of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFlexible, bends and conforms to almost any shape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCan be cleaned after installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eSticky Heat Shield 1\/8 x 23 x 24 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eSticky(TM) Shield is the ultimate way to stop heat from radiating into the drivers compartment of your ride. Made from a dense layer of 1\/8 fiberglass insulation (not poly) shielded by a rugged layer of .3 thick aluminum, Sticky Shield may be cleaned after installation and is resistant to the elements. The heavy-duty peel and stick adhesive will bond to almost any clean surface (not recommended for unfinished fiberglass or carbon). It is the perfect radiant heat shield for transmission tunnels, mufflers, catalytic converters, DPF s, turbos, downpipes, and exhaust system heat. This Sticky Shield can be used with less than 1 of airspace, however when used with 1 or more airspace, it is capable of shielding over 9% of heat. Did that set of long tube headers on your Mustang, Camaro, Challenger, or tuner move your catalytic converter where there are not any factory heat shields? Use Sticky Shield to stop the heat! That Jeep getting some serious heat in the transmission tunnel or from the cat, Sticky Shield it away! Sticky Shield is asbestos free. This product is designed to be used UNDER the vehicle on the floor pan, firewall, transmission tunnel, etc. it is not designed to be used under the carpet. Kits include Cool-Foil Tape(TM) to seal seams when putting two of these heat shields together and protect the edges of Sticky Shield. Please note, this product ships folded keep costs down. You may see bends in it when it is received, bends will become minimally visible after installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eStick-On Heat Shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003eThis Part Fits:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/table\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111099555996,"sku":"BHCF_180021","price":177.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-shields-up-to-9-of-heat-on-and-off-road-application-resists-the-elements-180023","title":"Heatshield Products Shields up to 9% of heat, On and off-road application, Resists the elements 180023","description":"Sticky(TM) Shield is the ultimate way to stop heat from radiating into the drivers compartment of your ride. Made from a dense layer of 1\/8 fiberglass insulation (not poly) shielded by a rugged layer of .3 thick aluminum, Sticky Shield may be cleaned after installation and is resistant to the elements. The heavy-duty peel and stick adhesive will bond to almost any clean surface (not recommended for unfinished fiberglass or carbon). It is the perfect radiant heat shield for transmission tunnels, mufflers, catalytic converters, DPF s, turbos, downpipes, and exhaust system heat. This Sticky Shield can be used with less than 1 of airspace, however when used with 1 or more airspace, it is capable of shielding over 9% of heat. Did that set of long tube headers on your Mustang, Camaro, Challenger, or tuner move your catalytic converter where there are not any factory heat shields? Use Sticky Shield to stop the heat! That Jeep getting some serious heat in the transmission tunnel or from the cat, Sticky Shield it away! Sticky Shield is asbestos free. This product is designed to be used UNDER the vehicle on the floor pan, firewall, transmission tunnel, etc. it is not designed to be used under the carpet. Kits include Cool-Foil Tape(TM) to seal seams when putting two of these heat shields together and protect the edges of Sticky Shield. Please note, this product ships folded keep costs down. You may see bends in it when it is received, bends will become minimally visible after installation\u003cp\u003e\u003cbr\u003eHeatshield Products Shields up to 9% of heat, On and off-road application, Resists the elements 180023 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eShields up to 9% of heat, On and off-road application, Resists the elements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eMade from ceramic insulation shielded by a rugged layer of aluminum, HP Sticky Shield may be pressure washed after installation and is resistant to the elements. With 1 inch or more airspace, shields up 9 percent of radiant heat away.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating reflective temperature of 11F, 2F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reflecting over 9 percent of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFlexible, bends and conforms to almost any shape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCan be cleaned after installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eSticky Heat Shield 1\/8 x 23 x 48 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eSticky(TM) Shield is the ultimate way to stop heat from radiating into the drivers compartment of your ride. Made from a dense layer of 1\/8 fiberglass insulation (not poly) shielded by a rugged layer of .3 thick aluminum, Sticky Shield may be cleaned after installation and is resistant to the elements. The heavy-duty peel and stick adhesive will bond to almost any clean surface (not recommended for unfinished fiberglass or carbon). It is the perfect radiant heat shield for transmission tunnels, mufflers, catalytic converters, DPF s, turbos, downpipes, and exhaust system heat. This Sticky Shield can be used with less than 1 of airspace, however when used with 1 or more airspace, it is capable of shielding over 9% of heat. Did that set of long tube headers on your Mustang, Camaro, Challenger, or tuner move your catalytic converter where there are not any factory heat shields? Use Sticky Shield to stop the heat! That Jeep getting some serious heat in the transmission tunnel or from the cat, Sticky Shield it away! Sticky Shield is asbestos free. This product is designed to be used UNDER the vehicle on the floor pan, firewall, transmission tunnel, etc. it is not designed to be used under the carpet. Kits include Cool-Foil Tape(TM) to seal seams when putting two of these heat shields together and protect the edges of Sticky Shield. Please note, this product ships folded keep costs down. You may see bends in it when it is received, bends will become minimally visible after installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eStick-On Heat Shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Stick-On Heat Shield 1\/8 Thk X 23 X 48 In - 1823\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111100014748,"sku":"BHCF_180023","price":372.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-shields-up-to-9-of-heat-on-and-off-road-application-resists-the-elements-180025","title":"Heatshield Products Shields up to 9% of heat, On and off-road application, Resists the elements 180025","description":"Sticky(TM) Shield is the ultimate way to stop heat from radiating into the drivers compartment of your ride. Made from a dense layer of 1\/8 fiberglass insulation (not poly) shielded by a rugged layer of .3 thick aluminum, Sticky Shield may be cleaned after installation and is resistant to the elements. The heavy-duty peel and stick adhesive will bond to almost any clean surface (not recommended for unfinished fiberglass or carbon). It is the perfect radiant heat shield for transmission tunnels, mufflers, catalytic converters, DPF s, turbos, downpipes, and exhaust system heat. This Sticky Shield can be used with less than 1 of airspace, however when used with 1 or more airspace, it is capable of shielding over 9% of heat. Did that set of long tube headers on your Mustang, Camaro, Challenger, or tuner move your catalytic converter where there are not any factory heat shields? Use Sticky Shield to stop the heat! That Jeep getting some serious heat in the transmission tunnel or from the cat, Sticky Shield it away! Sticky Shield is asbestos free. This product is designed to be used UNDER the vehicle on the floor pan, firewall, transmission tunnel, etc. it is not designed to be used under the carpet. Kits include Cool-Foil Tape(TM) to seal seams when putting two of these heat shields together and protect the edges of Sticky Shield. Please note, this product ships folded keep costs down. You may see bends in it when it is received, bends will become minimally visible after installation\u003cp\u003e\u003cbr\u003eHeatshield Products Shields up to 9% of heat, On and off-road application, Resists the elements 180025 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eShields up to 9% of heat, On and off-road application, Resists the elements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eMade from ceramic insulation shielded by a rugged layer of aluminum, HP Sticky Shield may be pressure washed after installation and is resistant to the elements. With 1 inch or more airspace, shields up 9 percent of radiant heat away.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating reflective temperature of 11F, 2F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reflecting over 9 percent of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFlexible, bends and conforms to almost any shape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCan be cleaned after installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eSticky Heat Shield 1\/8 x 36 x 47 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eSticky(TM) Shield is the ultimate way to stop heat from radiating into the drivers compartment of your ride. Made from a dense layer of 1\/8 fiberglass insulation (not poly) shielded by a rugged layer of .3 thick aluminum, Sticky Shield may be cleaned after installation and is resistant to the elements. The heavy-duty peel and stick adhesive will bond to almost any clean surface (not recommended for unfinished fiberglass or carbon). It is the perfect radiant heat shield for transmission tunnels, mufflers, catalytic converters, DPF s, turbos, downpipes, and exhaust system heat. This Sticky Shield can be used with less than 1 of airspace, however when used with 1 or more airspace, it is capable of shielding over 9% of heat. Did that set of long tube headers on your Mustang, Camaro, Challenger, or tuner move your catalytic converter where there are not any factory heat shields? Use Sticky Shield to stop the heat! That Jeep getting some serious heat in the transmission tunnel or from the cat, Sticky Shield it away! Sticky Shield is asbestos free. This product is designed to be used UNDER the vehicle on the floor pan, firewall, transmission tunnel, etc. it is not designed to be used under the carpet. Kits include Cool-Foil Tape(TM) to seal seams when putting two of these heat shields together and protect the edges of Sticky Shield. Please note, this product ships folded keep costs down. You may see bends in it when it is received, bends will become minimally visible after installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eStick-On Heat Shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003eThis Part Fits:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\u003ctr\u003e\n\u003cth align=\"left\" width=\"100\"\u003eYear\u003c\/th\u003e\n\u003cth align=\"left\" width=\"125\"\u003eMake\u003c\/th\u003e\n\u003cth align=\"left\" width=\"150\"\u003eModel\u003c\/th\u003e\n\u003cth align=\"left\" width=\"80\"\u003eSubmodel\u003c\/th\u003e\n\u003cth align=\"left\"\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/table\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111100244124,"sku":"BHCF_180025","price":518.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-shields-up-to-9-of-heat-on-and-off-road-application-resists-the-elements-180026","title":"Heatshield Products Shields up to 9% of heat, On and off-road application, Resists the elements 180026","description":"Sticky(TM) Shield is the ultimate way to stop heat from radiating into the drivers compartment of your ride. Made from a dense layer of 1\/8 fiberglass insulation (not poly) shielded by a rugged layer of .3 thick aluminum, Sticky Shield may be cleaned after installation and is resistant to the elements. The heavy-duty peel and stick adhesive will bond to almost any clean surface (not recommended for unfinished fiberglass or carbon). It is the perfect radiant heat shield for transmission tunnels, mufflers, catalytic converters, DPF s, turbos, downpipes, and exhaust system heat. This Sticky Shield can be used with less than 1 of airspace, however when used with 1 or more airspace, it is capable of shielding over 9% of heat. Did that set of long tube headers on your Mustang, Camaro, Challenger, or tuner move your catalytic converter where there are not any factory heat shields? Use Sticky Shield to stop the heat! That Jeep getting some serious heat in the transmission tunnel or from the cat, Sticky Shield it away! Sticky Shield is asbestos free. This product is designed to be used UNDER the vehicle on the floor pan, firewall, transmission tunnel, etc. it is not designed to be used under the carpet. Kits include Cool-Foil Tape(TM) to seal seams when putting two of these heat shields together and protect the edges of Sticky Shield. Please note, this product ships folded keep costs down. You may see bends in it when it is received, bends will become minimally visible after installation\u003cp\u003e\u003cbr\u003eHeatshield Products Shields up to 9% of heat, On and off-road application, Resists the elements 180026 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eShields up to 9% of heat, On and off-road application, Resists the elements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eMade from ceramic insulation shielded by a rugged layer of aluminum, HP Sticky Shield may be pressure washed after installation and is resistant to the elements. With 1 inch or more airspace, shields up 9 percent of radiant heat away.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating reflective temperature of 11F, 2F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reflecting over 9 percent of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eFlexible, bends and conforms to almost any shape\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCan be cleaned after installed\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eSticky Heat Shield 1\/8 x 47 x 48 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eSticky(TM) Shield is the ultimate way to stop heat from radiating into the drivers compartment of your ride. Made from a dense layer of 1\/8 fiberglass insulation (not poly) shielded by a rugged layer of .3 thick aluminum, Sticky Shield may be cleaned after installation and is resistant to the elements. The heavy-duty peel and stick adhesive will bond to almost any clean surface (not recommended for unfinished fiberglass or carbon). It is the perfect radiant heat shield for transmission tunnels, mufflers, catalytic converters, DPF s, turbos, downpipes, and exhaust system heat. This Sticky Shield can be used with less than 1 of airspace, however when used with 1 or more airspace, it is capable of shielding over 9% of heat. Did that set of long tube headers on your Mustang, Camaro, Challenger, or tuner move your catalytic converter where there are not any factory heat shields? Use Sticky Shield to stop the heat! That Jeep getting some serious heat in the transmission tunnel or from the cat, Sticky Shield it away! Sticky Shield is asbestos free. This product is designed to be used UNDER the vehicle on the floor pan, firewall, transmission tunnel, etc. it is not designed to be used under the carpet. Kits include Cool-Foil Tape(TM) to seal seams when putting two of these heat shields together and protect the edges of Sticky Shield. Please note, this product ships folded keep costs down. You may see bends in it when it is received, bends will become minimally visible after installation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eStick-On Heat Shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Stick-On Heat Shield 1\/8 Thk X 47 X 48 In - 1826\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111100407964,"sku":"BHCF_180026","price":636.99,"currency_code":"CAD","in_stock":false}]},{"product_id":"heatshield-products-reflects-heat-up-to-9-rugged-fiberglass-material-great-for-hoods-panels-710040","title":"Heatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026 panels 710040","description":"This heat shield cloth, has a high quality ?mirror finish compared to most other reflective aluminized cloth mats. In addition it weighs 4% less than comparable aluminized fiberglass cloth products. When used in applications when there is 1 of airspace and good air flow, Thermaflect Cloth is capable of reflecting 9% of radiant heat. The mirror like finish and light weight construction will blow the gold sticker stuff away with its reflectivity. Use Thermaflect Cloth as a heat shield for: under your hood, on a fuel cell, aluminum intercooler pipes, air filter box, or turn your aftermarket intake into real cold air intake! Face the aluminized side toward the source of heat to shield heat away. This product withstands 11F of radiant heat. Thermaflect Cloth is available with a high temperature peel and stick adhesive that will stick to almost any clean surface. Self-adhesive version is not recommended for rough unfinished fiberglass or carbon fiber.\u003cp\u003e\u003cbr\u003eHeatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels 710040 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eReflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eWith 1 inch of airspace and air flow, Thermaflect Cloth is capable of reflecting 9 percent of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11F of radiant heat.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating reflective temperature of 11F, 18F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reducing up to 9% of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHelps shield fire walls, hoods, body panels, floor boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eThermaflect Cloth 36 in  x 56 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThis heat shield cloth, has a high quality ?mirror finish compared to most other reflective aluminized cloth mats. In addition it weighs 4% less than comparable aluminized fiberglass cloth products. When used in applications when there is 1 of airspace and good air flow, Thermaflect Cloth is capable of reflecting 9% of radiant heat. The mirror like finish and light weight construction will blow the gold sticker stuff away with its reflectivity. Use Thermaflect Cloth as a heat shield for: under your hood, on a fuel cell, aluminum intercooler pipes, air filter box, or turn your aftermarket intake into real cold air intake! Face the aluminized side toward the source of heat to shield heat away. This product withstands 11F of radiant heat. Thermaflect Cloth is available with a high temperature peel and stick adhesive that will stick to almost any clean surface. Self-adhesive version is not recommended for rough unfinished fiberglass or carbon fiber.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eHeat shield cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Heat Shield Cloth .18 Thk X 36 X 56 In - 714\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111119872156,"sku":"BHCF_710040","price":216.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-reflects-heat-up-to-9-rugged-fiberglass-material-great-for-hoods-panels-711002","title":"Heatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026 panels 711002","description":"This heat shield cloth, has a high quality ?mirror finish compared to most other reflective aluminized cloth mats. In addition it weighs 4% less than comparable aluminized fiberglass cloth products. When used in applications when there is 1 of airspace and good air flow, Thermaflect Cloth is capable of reflecting 9% of radiant heat. The mirror like finish and light weight construction will blow the gold sticker stuff away with its reflectivity. Use it as a heat shield for: under your hood, on a fuel cell, aluminum intercooler pipes, air filter box, or turn your aftermarket intake into real cold air intake! To install, face the aluminized side toward the source of heat to shield heat away. This product withstands 11F of radiant heat (requires minimum of 1 of airspace) and up to 45?F of direct heat. Thermaflect Cloth is available with a high temperature peel and stick adhesive that will stick to almost any clean surface. It is not recommended for rough unfinished fiberglass or carbon fiber. Bulk heat shield cloth rolls available.\u003cp\u003e\u003cbr\u003eHeatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels 711002 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eReflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eWith 1 inch of airspace and air flow, Thermaflect Cloth is capable of reflecting 9 percent of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11F of radiant heat.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating reflective temperature of 11F, 18F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reducing up to 9% of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHelps shield fire walls, hoods, body panels, floor boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eThermaflect Cloth 24 in x 24 in w\/adh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eThis heat shield cloth, has a high quality ?mirror finish compared to most other reflective aluminized cloth mats. In addition it weighs 4% less than comparable aluminized fiberglass cloth products. When used in applications when there is 1 of airspace and good air flow, Thermaflect Cloth is capable of reflecting 9% of radiant heat. The mirror like finish and light weight construction will blow the gold sticker stuff away with its reflectivity. Use it as a heat shield for: under your hood, on a fuel cell, aluminum intercooler pipes, air filter box, or turn your aftermarket intake into real cold air intake! To install, face the aluminized side toward the source of heat to shield heat away. This product withstands 11F of radiant heat (requires minimum of 1 of airspace) and up to 45?F of direct heat. Thermaflect Cloth is available with a high temperature peel and stick adhesive that will stick to almost any clean surface. It is not recommended for rough unfinished fiberglass or carbon fiber. Bulk heat shield cloth rolls available.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eHeat shield cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Lightweight Heat Shield .18 X 24 X 24 In W\/Adh - 7112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111119937692,"sku":"BHCF_711002","price":117.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-reflects-heat-up-to-9-rugged-fiberglass-material-great-for-hoods-panels-721102","title":"Heatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026 panels 721102","description":"Keep your cool in the heat with our HP Heatshield Mat. When used in applications when there is 1 of airspace and air flow, this heat shield cloth is capable of reflecting 9% of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11?F of radiant heat (requires minimum of 1 of airspace) and up to 45?F of direct heat. This is perfect for using underneath your floor pan to shield heat from your DPF, muffler, catalytic converter, and exhaust system, or it can be used on your firewall to shield motor heat. It can also be used as a cold air intake heat shield, stick this onto your metal or plastic air box to stop heat from heating up your intake. The HP Heatshield Mat is available with a high temperature peel and stick adhesive. Self-adhesive version is not recommended for rough unfinished fiberglass or carbon fiber.\u003cp\u003e\u003cbr\u003eHeatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels 721102 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eReflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eThermaflect Cloth is capable of reflecting 9 percent of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11F of radiant heat.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating reflective temperature of 11F, 18F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reducing up to 9% of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHelps shield fire walls, hoods, body panels, floor boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eHeatshield Mat 1 ft x 2 ft w\/adh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eKeep your cool in the heat with our HP Heatshield Mat. When used in applications when there is 1 of airspace and air flow, this heat shield cloth is capable of reflecting 9% of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11?F of radiant heat (requires minimum of 1 of airspace) and up to 45?F of direct heat. This is perfect for using underneath your floor pan to shield heat from your DPF, muffler, catalytic converter, and exhaust system, or it can be used on your firewall to shield motor heat. It can also be used as a cold air intake heat shield, stick this onto your metal or plastic air box to stop heat from heating up your intake. The HP Heatshield Mat is available with a high temperature peel and stick adhesive. Self-adhesive version is not recommended for rough unfinished fiberglass or carbon fiber.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eHeat shield cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Heat Shield Cloth .32 X 12 X 24 In W\/Adh - 72112\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111120003228,"sku":"BHCF_721102","price":74.99,"currency_code":"CAD","in_stock":false}]},{"product_id":"heatshield-products-reflects-heat-up-to-9-rugged-fiberglass-material-great-for-hoods-panels-721202","title":"Heatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026 panels 721202","description":"Keep your cool in the heat with our HP Heatshield Mat. When used in applications when there is 1 of airspace and air flow, this heat shield cloth is capable of reflecting 9% of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11?F of radiant heat (requires minimum of 1 of airspace) and up to 45?F of direct heat. This is perfect for using underneath your floor pan to shield heat from your DPF, muffler, catalytic converter, and exhaust system, or it can be used on your firewall to shield motor heat. It can also be used as a cold air intake heat shield, stick this onto your metal or plastic air box to stop heat from heating up your intake. The HP Heatshield Mat is available with a high temperature peel and stick adhesive. Self-adhesive version is not recommended for rough unfinished fiberglass or carbon fiber.\u003cp\u003e\u003cbr\u003eHeatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels 721202 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eReflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eThermaflect Cloth is capable of reflecting 9 percent of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11F of radiant heat.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating reflective temperature of 11F, 18F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reducing up to 9% of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHelps shield fire walls, hoods, body panels, floor boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eHeatshield Mat 2 ft x 2 ft w\/adh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eKeep your cool in the heat with our HP Heatshield Mat. When used in applications when there is 1 of airspace and air flow, this heat shield cloth is capable of reflecting 9% of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11?F of radiant heat (requires minimum of 1 of airspace) and up to 45?F of direct heat. This is perfect for using underneath your floor pan to shield heat from your DPF, muffler, catalytic converter, and exhaust system, or it can be used on your firewall to shield motor heat. It can also be used as a cold air intake heat shield, stick this onto your metal or plastic air box to stop heat from heating up your intake. The HP Heatshield Mat is available with a high temperature peel and stick adhesive. Self-adhesive version is not recommended for rough unfinished fiberglass or carbon fiber.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eHeat shield cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Heat Shield Cloth .32 X 24 X 24 In W\/Adh - 72122\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111120101532,"sku":"BHCF_721202","price":121.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-reflects-heat-up-to-9-rugged-fiberglass-material-great-for-hoods-panels-721204","title":"Heatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026 panels 721204","description":"Keep your cool in the heat with our HP Heatshield Mat. When used in applications when there is 1 of airspace and air flow, this heat shield cloth is capable of reflecting 9% of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11?F of radiant heat (requires minimum of 1 of airspace) and up to 45?F of direct heat. This is perfect for using underneath your floor pan to shield heat from your DPF, muffler, catalytic converter, and exhaust system, or it can be used on your firewall to shield motor heat. It can also be used as a cold air intake heat shield, stick this onto your metal or plastic air box to stop heat from heating up your intake. The HP Heatshield Mat is available with a high temperature peel and stick adhesive. Bulk heat shield cloth rolls available.\u003cp\u003e\u003cbr\u003eHeatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels 721204 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eReflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eThermaflect Cloth is capable of reflecting 9 percent of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11F of radiant heat.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating reflective temperature of 11F, 18F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reducing up to 9% of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHelps shield fire walls, hoods, body panels, floor boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eHeatshield Mat 24 in x 48 in w\/adh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eKeep your cool in the heat with our HP Heatshield Mat. When used in applications when there is 1 of airspace and air flow, this heat shield cloth is capable of reflecting 9% of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11?F of radiant heat (requires minimum of 1 of airspace) and up to 45?F of direct heat. This is perfect for using underneath your floor pan to shield heat from your DPF, muffler, catalytic converter, and exhaust system, or it can be used on your firewall to shield motor heat. It can also be used as a cold air intake heat shield, stick this onto your metal or plastic air box to stop heat from heating up your intake. The HP Heatshield Mat is available with a high temperature peel and stick adhesive. Bulk heat shield cloth rolls available.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eHeat shield cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Heat Shield Cloth .32 X 24 X 48 In W\/Adh - 72124\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111120167068,"sku":"BHCF_721204","price":167.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-reflects-heat-up-to-9-rugged-fiberglass-material-great-for-hoods-panels-721505","title":"Heatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026 panels 721505","description":"Keep your cool in the heat with our HP Heatshield Mat. When used in applications when there is 1 of airspace and air flow, this heat shield cloth is capable of reflecting 9% of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11?F of radiant heat (requires minimum of 1 of airspace) and up to 45?F of direct heat. This is perfect for using underneath your floor pan to shield heat from your DPF, muffler, catalytic converter, and exhaust system, or it can be used on your firewall to shield motor heat. It can also be used as a cold air intake heat shield, stick this onto your metal or plastic air box to stop heat from heating up your intake. The HP Heatshield Mat is available with a high temperature peel and stick adhesive. Self-adhesive version is not recommended for rough unfinished fiberglass or carbon fiber.\u003cp\u003e\u003cbr\u003eHeatshield Products Reflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels 721505 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eReflects heat up to 9%, Rugged fiberglass material, Great for hoods \u0026amp; panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eThermaflect Cloth is capable of reflecting 9 percent of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11F of radiant heat.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating reflective temperature of 11F, 18F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reducing up to 9% of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHelps shield fire walls, hoods, body panels, floor boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eHeatshield Mat 58 in x 6 in w\/adh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eKeep your cool in the heat with our HP Heatshield Mat. When used in applications when there is 1 of airspace and air flow, this heat shield cloth is capable of reflecting 9% of radiant heat. Face the aluminized side toward the source of radiant heat to shield heat away. This product withstands 11?F of radiant heat (requires minimum of 1 of airspace) and up to 45?F of direct heat. This is perfect for using underneath your floor pan to shield heat from your DPF, muffler, catalytic converter, and exhaust system, or it can be used on your firewall to shield motor heat. It can also be used as a cold air intake heat shield, stick this onto your metal or plastic air box to stop heat from heating up your intake. The HP Heatshield Mat is available with a high temperature peel and stick adhesive. Self-adhesive version is not recommended for rough unfinished fiberglass or carbon fiber.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Cloth\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Heat Shield Cloth .32 X 58 X 6 In W\/Adh - 72155\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111120232604,"sku":"BHCF_721505","price":330.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-carbon-fiber-look-reflects-radiant-heat-great-for-hoods-and-panels-770001","title":"Heatshield Products Carbon fiber look, Reflects radiant heat, Great for hoods and panels 770001","description":"Made from crushed volcanic rock, our Lava Shield Mat has similar benefits as our HP Heatshield Mat with that trick carbon fiber look! Don't be tricked by the ?fool's gold , Lava Shield Mat outperforms that vinyl gold foil sticker stuff by reflecting 6% more radiant heat. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield, lowering your intake temperatures. Is there a better way to protect your carbon fiber hood, or body panel from heat damage than a carbon fiber looking heat shield? Lava Shield Mat can also be laid on a fire wall to shield radiant heat, transmission tunnel, or floor pan. In addition to having both reflective and insulating properties, the basalt fiber has excellent natural chemical resistance, water resistance, even acid resistance. This heat shield barrier cloth, can be used with less than 1 of airspace, 3\/8 minimum is recommended for use with the heavy duty Lava Shield Mat. Our Lava Shield withstands 12F direct continuous and 18F intermittent.\u003cp\u003e\u003cbr\u003eHeatshield Products Carbon fiber look, Reflects radiant heat, Great for hoods and panels 770001 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber look, Reflects radiant heat, Great for hoods and panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eLava Shield is designed to shield away and reduce heat with that trick carbon fiber look! This insulator helps to reflect radiant heat away to provide an air box heat shield or a heat shield barrier for your carbon fiber or fiberglass hood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating temperature of 12F, 2F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reducing up to 8% of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHelps shield fire walls, hoods, body panels, floor boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eLava Shield .8 thk x 12 x 24 in w\/adh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eMade from crushed volcanic rock, our Lava Shield Mat has similar benefits as our HP Heatshield Mat with that trick carbon fiber look! Don't be tricked by the ?fool's gold , Lava Shield Mat outperforms that vinyl gold foil sticker stuff by reflecting 6% more radiant heat. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield, lowering your intake temperatures. Is there a better way to protect your carbon fiber hood, or body panel from heat damage than a carbon fiber looking heat shield? Lava Shield Mat can also be laid on a fire wall to shield radiant heat, transmission tunnel, or floor pan. In addition to having both reflective and insulating properties, the basalt fiber has excellent natural chemical resistance, water resistance, even acid resistance. This heat shield barrier cloth, can be used with less than 1 of airspace, 3\/8 minimum is recommended for use with the heavy duty Lava Shield Mat. Our Lava Shield withstands 12F direct continuous and 18F intermittent.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eBody Heat Shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Volcanic Heat Shield .8 Thk X 12 In X 24 In - 771\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111120298140,"sku":"BHCF_770001","price":92.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-carbon-fiber-look-reflects-radiant-heat-great-for-hoods-and-panels-770002","title":"Heatshield Products Carbon fiber look, Reflects radiant heat, Great for hoods and panels 770002","description":"Made from crushed volcanic rock, our Lava Shield Mat has similar benefits as our HP Heatshield Mat with that trick carbon fiber look! Don't be tricked by the ?fool's gold , Lava Shield Mat outperforms that vinyl gold foil sticker stuff by reflecting 6% more radiant heat. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield, lowering your intake temperatures. Is there a better way to protect your carbon fiber hood, or body panel from heat damage than a carbon fiber looking heat shield? Lava Shield Mat can also be laid on a fire wall to shield radiant heat, transmission tunnel, or floor pan. In addition to having both reflective and insulating properties, the basalt fiber has excellent natural chemical resistance, water resistance, even acid resistance. This heat shield barrier cloth, can be used with less than 1 of airspace, 3\/8 minimum is recommended for use with the heavy duty Lava Shield Mat. Our Lava Shield withstands 12F direct continuous and 18F intermittent.\u003cp\u003e\u003cbr\u003eHeatshield Products Carbon fiber look, Reflects radiant heat, Great for hoods and panels 770002 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber look, Reflects radiant heat, Great for hoods and panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eLava Shield is designed to shield away and reduce heat with that trick carbon fiber look! This insulator helps to reflect radiant heat away to provide an air box heat shield or a heat shield barrier for your carbon fiber or fiberglass hood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating temperature of 12F, 2F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reducing up to 8% of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHelps shield fire walls, hoods, body panels, floor boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eLava Shield .8 thk x 24 x 24 in w\/adh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eMade from crushed volcanic rock, our Lava Shield Mat has similar benefits as our HP Heatshield Mat with that trick carbon fiber look! Don't be tricked by the ?fool's gold , Lava Shield Mat outperforms that vinyl gold foil sticker stuff by reflecting 6% more radiant heat. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield, lowering your intake temperatures. Is there a better way to protect your carbon fiber hood, or body panel from heat damage than a carbon fiber looking heat shield? Lava Shield Mat can also be laid on a fire wall to shield radiant heat, transmission tunnel, or floor pan. In addition to having both reflective and insulating properties, the basalt fiber has excellent natural chemical resistance, water resistance, even acid resistance. This heat shield barrier cloth, can be used with less than 1 of airspace, 3\/8 minimum is recommended for use with the heavy duty Lava Shield Mat. Our Lava Shield withstands 12F direct continuous and 18F intermittent.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eBody Heat Shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Volcanic Heat Shield .8 Thk X 24 In X 24 In - 772\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111120363676,"sku":"BHCF_770002","price":141.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-carbon-fiber-look-reflects-radiant-heat-great-for-hoods-and-panels-770005","title":"Heatshield Products Carbon fiber look, Reflects radiant heat, Great for hoods and panels 770005","description":"Made from crushed volcanic rock, our Lava Shield Mat has similar benefits as our HP Heatshield Mat with that trick carbon fiber look! Don't be tricked by the ?fool's gold , Lava Shield Mat outperforms that vinyl gold foil sticker stuff by reflecting 6% more radiant heat. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield, lowering your intake temperatures. Is there a better way to protect your carbon fiber hood, or body panel from heat damage than a carbon fiber looking heat shield? Lava Shield Mat can also be laid on a fire wall to shield radiant heat, transmission tunnel, or floor pan. In addition to having both reflective and insulating properties, the basalt fiber has excellent natural chemical resistance, water resistance, even acid resistance. This heat shield barrier cloth, can be used with less than 1 of airspace, 3\/8 minimum is recommended for use with the heavy duty Lava Shield Mat. Our Lava Shield withstands 12F direct continuous and 18F intermittent.\u003cp\u003e\u003cbr\u003eHeatshield Products Carbon fiber look, Reflects radiant heat, Great for hoods and panels 770005 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber look, Reflects radiant heat, Great for hoods and panels\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eLava Shield is designed to shield away and reduce heat with that trick carbon fiber look! This insulator helps to reflect radiant heat away to provide an air box heat shield or a heat shield barrier for your carbon fiber or fiberglass hood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating temperature of 12F, 2F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reducing up to 8% of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHelps shield fire walls, hoods, body panels, floor boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eLava Shield .8 thk x 48 x 6 in w\/adh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eMade from crushed volcanic rock, our Lava Shield Mat has similar benefits as our HP Heatshield Mat with that trick carbon fiber look! Don't be tricked by the ?fool's gold , Lava Shield Mat outperforms that vinyl gold foil sticker stuff by reflecting 6% more radiant heat. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield, lowering your intake temperatures. Is there a better way to protect your carbon fiber hood, or body panel from heat damage than a carbon fiber looking heat shield? Lava Shield Mat can also be laid on a fire wall to shield radiant heat, transmission tunnel, or floor pan. In addition to having both reflective and insulating properties, the basalt fiber has excellent natural chemical resistance, water resistance, even acid resistance. This heat shield barrier cloth, can be used with less than 1 of airspace, 3\/8 minimum is recommended for use with the heavy duty Lava Shield Mat. Our Lava Shield withstands 12F direct continuous and 18F intermittent.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eBody Heat Shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Volcanic Heat Shield .8 Thk X 48 In X 6 In - 775\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111120461980,"sku":"BHCF_770005","price":492.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-carbon-fiber-look-reflects-radiant-heat-great-for-hoods-and-firewalls-781002","title":"Heatshield Products Carbon fiber look, Reflects radiant heat, Great for hoods and firewalls 781002","description":"Made from crushed volcanic rock, our Lava Shield Mat has similar benefits as our HP Heatshield Mat with that trick carbon fiber look! Don't be tricked by the ?fool's gold , Lava Shield Mat outperforms that vinyl gold foil sticker stuff by reflecting 6% more radiant heat. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield, lowering your intake temperatures. Is there a better way to protect your carbon fiber hood, or body panel from heat damage than a carbon fiber looking heat shield? Lava Shield Mat can also be laid on a fire wall to shield radiant heat, transmission tunnel, or floor pan. In addition to having both reflective and insulating properties, the basalt fiber has excellent natural chemical resistance, water resistance, even acid resistance. This heat shield barrier cloth, can be used with less than 1 of airspace, 3\/8 minimum is recommended for use with the heavy duty Lava Shield Mat. Our Lava Shield withstands 12F direct continuous and 18F intermittent.\u003cp\u003e\u003cbr\u003eHeatshield Products Carbon fiber look, Reflects radiant heat, Great for hoods and firewalls 781002 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber look, Reflects radiant heat, Great for hoods and firewalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eLava Shield is designed to shield away and reduce heat with that trick carbon fiber look! This insulator helps to reflect radiant heat away to provide an air box heat shield or a heat shield barrier for your carbon fiber or fiberglass hood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating temperature of 12F, 2F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reducing up to 8% of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHelps shield fire walls, hoods, body panels, floor boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eLava Shield .25 thk x 24 x 23 in  w\/adh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eMade from crushed volcanic rock, our Lava Shield Mat has similar benefits as our HP Heatshield Mat with that trick carbon fiber look! Don't be tricked by the ?fool's gold , Lava Shield Mat outperforms that vinyl gold foil sticker stuff by reflecting 6% more radiant heat. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield, lowering your intake temperatures. Is there a better way to protect your carbon fiber hood, or body panel from heat damage than a carbon fiber looking heat shield? Lava Shield Mat can also be laid on a fire wall to shield radiant heat, transmission tunnel, or floor pan. In addition to having both reflective and insulating properties, the basalt fiber has excellent natural chemical resistance, water resistance, even acid resistance. This heat shield barrier cloth, can be used with less than 1 of airspace, 3\/8 minimum is recommended for use with the heavy duty Lava Shield Mat. Our Lava Shield withstands 12F direct continuous and 18F intermittent.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eBody Heat Shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Volcanic Heat Shield .25 Thk X 23 X 24 In - 7812\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111120527516,"sku":"BHCF_781002","price":219.99,"currency_code":"CAD","in_stock":true}]},{"product_id":"heatshield-products-carbon-fiber-look-reflects-radiant-heat-great-for-hoods-and-firewalls-781005","title":"Heatshield Products Carbon fiber look, Reflects radiant heat, Great for hoods and firewalls 781005","description":"Made from crushed volcanic rock, our Lava Shield Mat has similar benefits as our HP Heatshield Mat with that trick carbon fiber look! Don't be tricked by the ?fool's gold , Lava Shield Mat outperforms that vinyl gold foil sticker stuff by reflecting 6% more radiant heat. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield, lowering your intake temperatures. Is there a better way to protect your carbon fiber hood, or body panel from heat damage than a carbon fiber looking heat shield? Lava Shield Mat can also be laid on a fire wall to shield radiant heat, transmission tunnel, or floor pan. In addition to having both reflective and insulating properties, the basalt fiber has excellent natural chemical resistance, water resistance, even acid resistance. This heat shield barrier cloth, can be used with less than 1 of airspace, 3\/8 minimum is recommended for use with the heavy duty Lava Shield Mat. Our Lava Shield withstands 12F direct continuous and 18F intermittent.\u003cp\u003e\u003cbr\u003eHeatshield Products Carbon fiber look, Reflects radiant heat, Great for hoods and firewalls 781005 \u003c\/p\u003e\u003cp\u003e\u003cbr\u003eSpecifications:\u003cbr\u003e\u003c\/p\u003e\u003ctable border=\"1\"\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DEF\u003c\/td\u003e\n\u003ctd\u003eHeat Shield Insulator\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_DES\u003c\/td\u003e\n\u003ctd\u003eCarbon fiber look, Reflects radiant heat, Great for hoods and firewalls\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_EXT\u003c\/td\u003e\n\u003ctd\u003eLava Shield is designed to shield away and reduce heat with that trick carbon fiber look! This insulator helps to reflect radiant heat away to provide an air box heat shield or a heat shield barrier for your carbon fiber or fiberglass hood.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eContinuous operating temperature of 12F, 2F intermittent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eCapable of reducing up to 8% of radiant heat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eAdhesive backing sticks to almost any clean surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_FAB\u003c\/td\u003e\n\u003ctd\u003eHelps shield fire walls, hoods, body panels, floor boards\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_INV\u003c\/td\u003e\n\u003ctd\u003eLava Shield .25 thk x 47 x 6 in w\/adh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_MKT\u003c\/td\u003e\n\u003ctd\u003eMade from crushed volcanic rock, our Lava Shield Mat has similar benefits as our HP Heatshield Mat with that trick carbon fiber look! Don't be tricked by the ?fool's gold , Lava Shield Mat outperforms that vinyl gold foil sticker stuff by reflecting 6% more radiant heat. This heat shield insulator helps to reflect radiant heat away to provide an air box heat shield, lowering your intake temperatures. Is there a better way to protect your carbon fiber hood, or body panel from heat damage than a carbon fiber looking heat shield? Lava Shield Mat can also be laid on a fire wall to shield radiant heat, transmission tunnel, or floor pan. In addition to having both reflective and insulating properties, the basalt fiber has excellent natural chemical resistance, water resistance, even acid resistance. This heat shield barrier cloth, can be used with less than 1 of airspace, 3\/8 minimum is recommended for use with the heavy duty Lava Shield Mat. Our Lava Shield withstands 12F direct continuous and 18F intermittent.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_SHO\u003c\/td\u003e\n\u003ctd\u003eHood Heat Shield\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDescription_TLE\u003c\/td\u003e\n\u003ctd\u003eHeatshield - Volcanic Heat Shield .25 Thk X 47 X 6 In - 7815\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"Heatshield Products","offers":[{"title":"Default Title","offer_id":45111120593052,"sku":"BHCF_781005","price":843.99,"currency_code":"CAD","in_stock":true}]}],"url":"https:\/\/www.mypartsguy.ca\/collections\/heat-shield-insulator.oembed","provider":"My Parts Guy MPG Auto","version":"1.0","type":"link"}