Edelbrock part #7156-CP Performer RPM Pontiac intake manifold is designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V and 265/301 V8's). The PN 7156-CP version comes with a brilliant Chrome plasma finish that is durable and easy to maintain.Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications

Edelbrock Performer RPM Pontiac 326-455 Intake Manifold, Chrome Plasma Finish 7156-CP

Specifications:

RGL	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Series	Performer RPM
Vehicle Model	Pontiac
10	Aluminum
353	No
3390	Performance
6642	Dual Plane
6643	6.880
6644	7.450
6645	8.000
9063	No
EGR Port	No
Flange Type	4150
Finish	Chrome Plasma
Basic Operating RPM Range	1500-6500
Description_ABR	Intake Mnfld
Description_INV	RPM Pontiac 1965-79 Intake Manifold
Description_LAB	Performer RPM Pontiac 326-455 Intake Manifold, Chrome Plasma Finish
Description_DES	Performer RPM Pontiac 326-455 Intake Manifold, Chrome Plasma Finish
Description_SHP	None
Description_ASM	Pontiac:-:326 (5.3L)/350 (5.7L)/389 (6.4L)/400 (6.6L)/421 (6.9L)/428 (7.0L)/455 (7.4)
Description_EXT	Edelbrock Performer RPM Pontiac Intake Manifold for Pontiac 326-455 V8 with a beautiful Chrome Plasma finish.
Description_MKT	Edelbrock part #7156-CP Performer RPM Pontiac intake manifold is designed for 1965-79 street 326-455 c.i.d. Pontiac V8's (except Ram Air V and 265/301 V8's). The PN 7156-CP version comes with a brilliant Chrome plasma finish that is durable and easy to maintain.Recommended for high-performance street, strip and marine. Has clearance for HEI distributor. Will not fit under Trans Am Shaker hood without modifications
Description_TRA	Recommended intake gasket: Edelbrock #7280
Description_TRA	No provisions for OEM choke
Description_TRA	OEM carb requires conversion to electric/manual choke
Description_TRA	Carb recommendations: Edelbrock Thunder Series AVS, AVS2 or Performer Series 650-800 cfm.
Description_TRA	For 1968-71 use Edelbrock #8015 throttle bracket
Description_TRA	Manifold height: 1-1/4" taller than stock, A-6.88", B-8.00" measured to engine block
Description_TRA	Carb pad height: 7.45"
Description_TRA	Port exit dimensions: 1.10" x 2.06"
Description_TRA	Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
Description_TRA	Hardened washers Must be used with intake bolts to ensure proper torque and prevent galling of the aluminum.
Description_DEF	Engine Intake Manifold