Edelbrock part #182062 is a state-of-the-art Electric Fuel Pump offering maximum performance in a compact package. With a Blue anodized aluminum housing and high-quality internals, they are both strong and durable. The carbon vanes and composite rotor give these pumps the added boost for maximum performance. The high quality construction results in a pump that is 4 to 14 dB quieter than competitors' pumps at the same pressure. Edelbrock #182062 has a free flow rate of 160 GPH, enough to feed a 1,000+ hp engine. This pump is factory preset to 12 psi and requires an external regulator such as the Edelbrock regulator #1727.

Edelbrock Electric Fuel Pump 182062

Specifications:

Wiring Harness Included	No
Outlet Thread Diameter	0.5
Inlet Fitting Thread Size	0.5
Fuel Sending Unit Included	No
In Tank or External	External
RGL	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Regulator Included	No
Seal And Lock Ring Included	No
Compatible Fuel Type	Gas
Outlet Fitting Thread Size	0.5
Mounting Hardware Included	Yes
Outlet Quantity	1
Fuel Pump Inlet Type	NPT
Fuel Type	Gas
Inlet Thread Diameter	0.5
Terminal Type	Lead Wire
Voltage	12
Gasket Or Seal Included	No
Outlet Type	NPT
Pump Type	Electric
Negative Ground	Yes
Pump Design	In-line Electric Fuel Pump
Mounting Bracket Included	Yes
Strainer Included	No
Wire Quantity	2
Inlet Type	NPT
Internal Or External	External
Universal Or Specific Fit	Universal
Description_ABR	ElecFuelPump
Description_INV	Edelbrock Electric Fuel Pump #182062
Description_LAB	Blue Electric Fuel Pump - 160 GPH
Description_EXT	Edelbrock part #182062 is a state-of-the-art Electric Fuel Pump offering maximum performance in a compact package.
Description_MKT	Edelbrock part #182062 is a state-of-the-art Electric Fuel Pump offering maximum performance in a compact package. With a Blue anodized aluminum housing and high-quality internals, they are both strong and durable. The carbon vanes and composite rotor give these pumps the added boost for maximum performance. The high quality construction results in a pump that is 4 to 14 dB quieter than competitors' pumps at the same pressure. Edelbrock #182062 has a free flow rate of 160 GPH, enough to feed a 1,000+ hp engine. This pump is factory preset to 12 psi and requires an external regulator such as the Edelbrock regulator #1727.
Description_TRA	160GPH
Description_TRA	Factory pressure setting: 12 psi
Description_TRA	Inlet Port: 1/2" (NPT)
Description_TRA	Outlet Port: 1/2" (NPT)
Description_TRA	External Regulator Required: Yes
Description_TRA	Supported HP: 1,000+
Description_TRA	These pumps should be mounted as close to the fuel tank ass possible, at or below the fuel level
Description_TRA	For proper installation and voltage requirements, use fuel pump relay kit #1795
Description_TRA	Pump is for gasoline only
Description_TRA	Call for more information
Description_DEF	Electric Fuel Pump