Edelbrock part #17303 fuel pump is a gravity fed type pump with a simple 2 wire design. It requires approximately one amp average draw at maximum delivery and works on 12 Volt negative ground systems only. It features an in-line style rotor and vane pump design. 2-3.5 PSI, 30 GPH for most carbureted applications and is compatible with gasoline and E85. Pump has integrated 5/16 barb fittings on fuel outlet and 5/16 fitting on included fuel filter inlet.

Edelbrock Electric Fuel Pump 17303

Specifications:

Mounting Bracket Included	Yes
Wiring Harness Included	No
Maximum Flow Rating	114 LPH/30
Fuel Pump Inlet Type	Hose Barb
Fuel Sending Unit Included	No
Minimum Pressure	2
Internal Or External	External
Universal Or Specific Fit	Universal
Pump Design	In-line Electric Fuel Pump
RGL	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
Outlet Type	Hose Barb
Negative Ground	Yes
Terminal Type	Lead Wire
Mounting Hardware Included	Yes
Maximum Pressure	3.5
Strainer Included	No
Regulator Included	No
Fuel Type	Gas
Seal And Lock Ring Included	No
Outlet Quantity	1
Voltage	12
Gasket Or Seal Included	No
Inlet Type	Hose Barb
Pump Type	Electric
Outlet Outside Diameter	0.312
In Tank or External	External
Compatible Fuel Type	Gasoline and E85
Description_TRA	Designed for use with automotive and industrial applications
Description_TRA	Includes filter and all of the necessary hardware for installation
Description_DEF	Electric Fuel Pump
Description_ABR	ElecFuelPump
Description_INV	Edelbrock Electric Fuel Pump #17303
Description_LAB	Universal Micro Electric Fuel Pump - 30 GPH / 114 LPH (Gasoline/E85)
Description_EXT	Edelbrock part #17303 fuel pump is a gravity fed type pump with a simple 2 wire design. It requires approximately one amp average draw at maximum delivery and works on 12 Volt negative ground systems only.
Description_MKT	Edelbrock part #17303 fuel pump is a gravity fed type pump with a simple 2 wire design. It requires approximately one amp average draw at maximum delivery and works on 12 Volt negative ground systems only. It features an in-line style rotor and vane pump design. 2-3.5 PSI, 30 GPH for most carbureted applications and is compatible with gasoline and E85. Pump has integrated 5/16 barb fittings on fuel outlet and 5/16 fitting on included fuel filter inlet.
Description_TRA	For use with standard 12-volt negative ground systems with 1 amp draw at maximum delivery
Description_TRA	Features an easy to setup 2-wire design
Description_TRA	Features a gravity fed in-line, self-priming and regulating design
Description_TRA	Can also be used as a lift or transfer pump