Edelbrock part #2716-CP Performer EPS intake manifold is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or AVS2 series carburetors. The runner design is "tuned" for peak torque at 3500 rpm on a 350-inch engine and is ideal for power from off-idle to 5500 rpm. Dyno tests showed gains averaging 5+ ft-lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. The PN 2716-CP version comes with a brilliant Chrome Plasma finish that is durable and easy to maintain. The Plasma finishes are applied by a fully automated 7 stage prewash and 4 stage finish. A durable clear powder coat finishes the process.

Edelbrock Edelbrock Perf EPS Manifold for Small-Block Chevy Vortec, Chrome Plasma Finish 2716-CP

Specifications:

Vehicle Model	Chevrolet
Series	Performer
RGL	WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
10	Aluminum
353	No
6642	Dual Plane
6643	3.95
6644	4.52
6645	5.08
9063	No
EGR Port	No
Finish	Chrome Plasma
Basic Operating RPM Range	Idle-5500
Flange Type	4150
Grade Type	Performance
Description_ABR	Intake Mnfld
Description_INV	Manifold
Description_INV	SB Chevy Perfmr Chrome Plasma
Description_LAB	Edelbrock Perf EPS Manifold for Small-Block Chevy Vortec, Chrome Plasma Finish
Description_DES	Edelbrock Perf EPS Manifold for Small-Block Chevy Vortec, Chrome Plasma Finish
Description_SHP	None
Description_ASM	Chevy Small-Block Vortec
Description_ASM	Chevy Small-Block Vortec
Description_EXT	Edelbrock Part #2716-CP Performer EPS intake manifold is designed for Small-Block Chevy with Vortec or E-tec style cylinder heads. Perfect for any builder looking for optimum idle-5500 rpm performance with a beautiful Chrome Plasma finish.
Description_MKT	Edelbrock part #2716-CP Performer EPS intake manifold is designed for 262-400 c.i.d. Chevy V8's with 1996 and later Vortec (L31) cast iron or Edelbrock E-Tec aluminum heads. The Performer EPS dual-plane manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or AVS2 series carburetors. The runner design is "tuned" for peak torque at 3500 rpm on a 350-inch engine and is ideal for power from off-idle to 5500 rpm. Dyno tests showed gains averaging 5+ ft-lbs. of torque from 3000 to 4500 rpm for more performance where you need it most. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. The PN 2716-CP version comes with a brilliant Chrome Plasma finish that is durable and easy to maintain. The Plasma finishes are applied by a fully automated 7 stage prewash and 4 stage finish. A durable clear powder coat finishes the process.
Description_TRA	Manifold ht: A-3.95", B-5.02"
Description_TRA	Carb pad height: 4.52"
Description_TRA	Carb recommendations: Edelbrock AVS2, Performer Series. Port exit dimensions: 2.05" tall with slanted side walls
Description_TRA	Recommended intake gasket: Edelbrock #7235 or GM #89017465
Description_TRA	Use RTV sealant to properly seal end seals, such as Edelbrock High Temp Silicone sealant #1076, DO NOT USE END SEALS GASKETS.
Description_TRA	Use #8516 Edelbrock bolt kit which includes hardened washers to prevent galling of the alumnum manifold
Description_TRA	Sealant must be used on intake bolt threads if the threads extend into lifter valley or coolant passage. Will not fit under stock Corvette hood. Use Edelbrock Vortec throttle bracket #8032.
Description_DEF	Engine Intake Manifold