Edelbrock E-Series Cylinder Head Bolt Kit #85602 is a high-quality set of bolts for use with Ford 351C heads equipped with Edelbrock Performer RPM #61629 cylinder heads. This bolt kit contains all parts necessary to replace the factory head bolts. E-Series bolts have a yield tensile strength of 190,000 PSI for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. E-Series Cylinder Head Bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock E stamped into the head.

Edelbrock Edelbrock E-Series Cylinder Head Bolt Kit #85602 for Ford 351C engines 85602

Specifications:

RGL	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
9	Hex
10	8740 Chromoly
546	Coarse
557	0.5
2596	4.5
3072	Yes
Finish	Black Oxide
Grade Type	Performance
Quantity	Kit
Length	(20) 4.50
Description_MKT	Edelbrock E-Series Cylinder Head Bolt Kit #85602 is a high-quality set of bolts for use with Ford 351C heads equipped with Edelbrock Performer RPM #61629 cylinder heads. This bolt kit contains all parts necessary to replace the factory head bolts. E-Series bolts have a yield tensile strength of 190,000 PSI for strong and reliable loading with generous filleting throughout to eliminate stress risers. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. E-Series Cylinder Head Bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock E stamped into the head.
Description_FAB	For Ford 351C with Performer RPM heads
Description_FAB	Yield tensile strength of 190,000 PSI
Description_FAB	Heat treating with rolled threads for superior form and strength
Description_FAB	black-oxide finish with sealer
Description_FAB	Edelbrock E logo stamped on bolt head
Description_TRA	The Edelbrock #8560 is made specifically for Ford Cleveland V8
Description_TRA	Installation is the same as for original equipment cylinder heads. Consult service manual for specific procedures, if necessary.
Description_TRA	Be sure that the surface of the block and the surface of the head are thoroughly cleaned to remove any oily film before installation.
Description_TRA	Use alcohol or lacquer thinner on a lint-free rag to clean. Apply oil or suitable thread lubricant to head bolt threads and the underside of bolt heads and washers.
Description_TRA	Torque 1/2" bolts to 100-110 ft./lbs (1/2" bolts) in four steps (30, 60, 90, 100-110) following the factory tightening sequence.
Description_ABR	HeadBoltKit
Description_INV	Edelbrock Cylinder Head Bolt Kit #85602
Description_LAB	Edelbrock E-Series Cylinder Head Bolt Kit #85602 for Ford 351C engines
Description_DES	Edelbrock E-Series Cylinder Head Bolt Kit #85602 for Ford 351C engines
Description_SHP	None
Description_ASM	Ford:Cleveland:351C (5.8L)
Description_EXT	Edelbrock #85602 is a Head Bolt Kit for 1970-74 S/B Ford 351 Cleveland Engines with Edelbrock #61629, 61625, and 61609 Performer RPM Cylinder Heads. Complete set of Head Bolts & Washers for a pair of heads.
Description_DEF	Engine Cylinder Head Bolt Set