"Edelbrock E-Series Cylinder Head Bolt Kit #85322 is designed for use with Edelbrock Performer Cylinder Heads #60129/#60139 and Performer RPM Cylinder Heads #60109/#60119 used on 1970-later AMC engines with 1/2-inch diameter head bolts. This kit contains all necessary parts to replace the factory head bolts. E-Series bolts have a yield tensile strength of 190,000 PSI for strong and reliable loading. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. E-Series Cylinder Head Bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock E stamped into the head."

Edelbrock Edelbrock E-Series Cylinder Head Bolt Kit #85322 for 1970-later AMC V8 engines 85322

Specifications:

RGL	WARNING: This product can expose you to Chromium, which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65warnings.ca.gov.
9	Hex
10	8740 Chromoly
546	Coarse
557	0.5
2596	2.5
3072	Yes
Finish	Black Oxide
Grade Type	Performance
Quantity	Kit
Length	(10) 2.25 in, (4) 3.00 in, (14) 3.75
Description_ABR	HeadBoltKit
Description_INV	Edelbrock Cylinder Head Bolt Kit #85322
Description_LAB	Edelbrock E-Series Cylinder Head Bolt Kit #85322 for 1970-later AMC V8 engines
Description_DES	Edelbrock E-Series Cylinder Head Bolt Kit #85322 for 1970-later AMC V8 engines
Description_SHP	None
Description_ASM	AMC:-:304 (5.0L)/360 (5.9L)/401 (6.6L)
Description_EXT	Edelbrock Head Bolt Kit #85322 is for 1970-later AMC 290-401 Engines with Edelbrock #60129, 60139, 60109, & 60119 Performer & Performer RPM Cylinder Heads. Kit Includes Complete Set of 1/2" Diameter Bolts and Washers.
Description_MKT	"Edelbrock E-Series Cylinder Head Bolt Kit #85322 is designed for use with Edelbrock Performer Cylinder Heads #60129/#60139 and Performer RPM Cylinder Heads #60109/#60119 used on 1970-later AMC engines with 1/2-inch diameter head bolts. This kit contains all necessary parts to replace the factory head bolts. E-Series bolts have a yield tensile strength of 190,000 PSI for strong and reliable loading. Bolt threads are rolled after heat-treating for superior form and strength, while a small hex head provides extra space for socket clearance in tight situations. E-Series Cylinder Head Bolts have a durable black oxide finish with sealer and come with the distinctive Edelbrock E stamped into the head."
Description_TRA	The Edelbrock #85322 is made specifically for 1970- Later AMC
Description_TRA	Installation is the same as for original equipment cylinder heads.
Description_TRA	Consult service manual for specific procedures, if necessary.
Description_TRA	Be sure that the surface of the block and the surface of the head are thoroughly cleaned to remove any oily film before installation.
Description_TRA	Use alcohol or lacquer thinner on a lint-free rag to clean. Apply oil or suitable thread lubricant to head bolt threads and the underside of bolt heads and washers.
Description_TRA	Torque cylinder head bolts in three steps following the factory tightening sequence
Description_DEF	Engine Cylinder Head Bolt Set